3210609 Phoenix Contact Terminal Blocks
Part#:3210609
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 1115
May 9, 2024
About the product: Double-level terminal block, connection method: Push-in connection, cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, width: 5.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3210609 Phoenix Contact price in the box on the right side or send a quick quote.
3210609 Product Details
- Nominal cross section 2.5 mm²
- Overvoltage category III
- Maximum load current 24 A (with 4 mm² conductor cross section, rigid)
- Result of power-frequency withstand voltage test Test passed
- Bending test conductor cross section/weight 0.14 mm² / 0.2 kg
- Tight fit on carrier NS 35
- Short circuit stability result Test passed
- Result of thermal test Test passed
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Number of shocks per direction 3
- Number of levels 2
- Insulating material PA
- Insulating material group I
- Open side panel Yes
- Result of surge voltage test Test passed
- Power frequency withstand voltage setpoint 1.89 kV
- Bending test turns 135
- Result of voltage-drop test Test passed
- Result of temperature-rise test Test passed
- Short-time current 0.48 kA
- Oscillation, broadband noise test result Test passed
- Test duration per axis 5 h
- Relative insulation material temperature index (Elec.; UL 746 B) 130 °C
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg
- End cover width 2.2 mm
- Height NS 35/15 62.5 mm
- Conductor cross section solid max. 4 mm²
- Conductor cross section flexible max. 4 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 0.5 mm²
- ECLASS 5.1 27141100
- ECLASS 7.0 27141120
- ECLASS 9.0 27141120
- Rated surge voltage 6 kV
- Nominal current IN 20 A
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Finger protection guaranteed
- Bending test rotation speed 10 rpm
- Conductor cross section tensile test 4 mm²
- Result of aging test Test passed
- Proof of thermal characteristics (needle flame) effective duration 30 s
- ASD level 6.12 (m/s2)2/Hz
- Shock duration 18 ms
- Static insulating material application in cold -60 °C
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Conductor cross section solid min. 0.14 mm²
- Conductor cross section AWG min. 26
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm²
- Stripping length 8 mm ... 10 mm
- ECLASS 10.0.1 27141120
- ECLASS 11.0 27141120
- UNSPSC 20.0 39121410
- UNSPSC 18.0 39121410
- Color gray
- Maximum power dissipation for nominal condition 0.77 W (the value is multiplied when connecting multiple levels)
- Back of the hand protection guaranteed
- Checking the mechanical stability of terminal points (5 x conductor connection) Test passed
- Tensile test result Test passed
- Result of tight fit on support Test passed
- Requirements, voltage drop ≤ 3.2 mV
- Ageing test for screwless modular terminal block temperature cycles 192
- Test spectrum Service life test category 2, bogie-mounted
- Shock test result Test passed
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Width 5.2 mm
- Connection method Push-in connection
- Conductor cross section AWG max. 12
- Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm²
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 5.0 27141100
- ECLASS 6.0 27141100
- ETIM 7.0 EC000897
- UNSPSC 21.0 39121410
- Number of connections 8
- Flammability rating according to UL 94 V0
- Connection in acc. with standard IEC 60947-7-1
- Nominal voltage UN 800 V
- Surge voltage test setpoint 7.3 kV
- Result of flexion and pull-out test Test passed
- Tractive force setpoint 60 N
- Setpoint 1 N
- Conductor cross section short circuit testing 4 mm²
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Acceleration 30g
- Shock form Half-sine
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Length 115.2 mm
- Height NS 35/7,5 55 mm
- Conductor cross section flexible min. 0.14 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm²
- Internal cylindrical gage A3
- ETIM 6.0 EC000897
- UNSPSC 13.2 39121410
- UNSPSC 19.0 39121410
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
This item can ship within 24h!
1-year warranty
$6.68
3210609
Stock:
1115
Select Qty:
$6.68
$6.68 each
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨