3210567 Phoenix Contact Terminal Blocks

3210567 Product Details

• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Relative insulation material temperature index (Elec.; UL 746 B)
  130 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Result of flexion and pull-out test
  Test passed
• Short-time current
  0.48 kA
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Acceleration
  30g
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Requirements, voltage drop
  ≤ 3.2 mV
• Number of connections
  4
• Flammability rating according to UL 94
  V0
• Overvoltage category
  III
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Surge voltage test setpoint
  7.3 kV
• Finger protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Tensile test result
  Test passed
• Length
  68 mm
• Height NS 35/7,5
  47.5 mm
• Number of levels
  2
Color
gray
Area of application
Railway industry
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Maximum load current
26 A (with 4 mm² conductor cross section, rigid)
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Internal cylindrical gage
A4
ECLASS 11.0
27141120
ECLASS 9.0
27141120
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Rated surge voltage
6 kV
Connection in acc. with standard
CSA
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
4 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Shock test result
Test passed
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
5.2 mm
Connection method
Push-in connection
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
ECLASS 10.0.1
27141120
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 3.0
EC000897
ETIM 2.0
EC000897
UNSPSC 19.0
39121410
Conductor cross section solid max.
4 mm²
Nominal cross section
2.5 mm²
Insulating material group
I
Open side panel
Yes
Bending test turns
135
Result of tight fit on support
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
45.8 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Stripping length
8 mm ... 10 mm
ECLASS 4.1
27141100
ECLASS 7.0
27141120
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Insulating material
PA
Degree of pollution
3
Nominal current IN
22 A (with 2.5 mm² conductor connection cross section)
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Conductor cross section tensile test
4 mm²
Setpoint
1 N
Short circuit stability result
Test passed
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/15
55 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section AWG max.
12
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Result of temperature-rise test
Test passed
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
ECLASS 5.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
ETIM 6.0
EC000897
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Nominal voltage UN
500 V
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Static insulating material application in cold
-60 °C
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Tractive force setpoint
60 N
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of voltage-drop test
Test passed
End cover width
2.2 mm

Product condition