3210156 Phoenix Contact Terminal Blocks

3210156 Product Details

• ETIM 6.0
  EC000902
• Number of levels
  1
• Insulating material group
  I
• Maximum load current
  20 A (with 4 mm² conductor cross section, rigid)
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Result of voltage-drop test
  Test passed
• Short circuit stability result
  Test passed
• Result of aging test
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• UNSPSC 19.0
  39121410
• Color
  gray
• Overvoltage category
  III
• Nominal voltage UN
  400 V
• Result of surge voltage test
  Test passed
• Bending test turns
  135
• Result of temperature-rise test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Connection in acc. with standard
CSA
Conductor cross section solid max.
4 mm²
Conductor cross section flexible max.
4 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
ECLASS 10.0.1
27141126
ECLASS 5.0
27141100
ECLASS 7.0
27141126
ETIM 7.0
EC000902
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
6 kV
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Setpoint
1 N
Short-time current
0.3 kA
Ageing test for screwless modular terminal block temperature cycles
192
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Test duration per axis
5 h
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
62 mm
Stripping length
8 mm ... 10 mm
Conductor cross section solid min.
0.34 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
Number of connections
2
Potentials
1
Maximum power dissipation for nominal condition
0.77 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
2.5 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
44 mm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
ECLASS 6.0
27141100
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Nominal cross section
2.5 mm²
Degree of pollution
3
Nominal current IN
20 A
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
5.2 mm
Height NS 35/7,5
36.5 mm
Connection method
Push-in connection
Conductor cross section AWG max.
12
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A3
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 9.0
27141126
ETIM 4.0
EC000902
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410
Shock duration
18 ms
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Height
35.3 mm
Connection
1 level
Max. AWG conductor cross section, flexible
14
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141100

Product condition