3209594 Phoenix Contact Terminal Blocks

3209594 Product Details

• Conductor cross section flexible, with ferrule with plastic sleeve max.
  2.5 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  0.5 mm²
• ECLASS 10.0.1
  27141141
• Connection in acc. with standard
  CSA
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.34 mm²
• Number of connections
  4
• Rated surge voltage
  8 kV
• Open side panel
  Yes
• Back of the hand protection
  guaranteed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• End cover width
  2.2 mm
• Nominal cross section
  2.5 mm²
• Degree of pollution
  3
• Insulating material group
  I
• Finger protection
  guaranteed
• ASD level
  6.12 (m/s2)2/Hz
Shock test result
Test passed
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Height
35.3 mm
Connection
1 level
Color
green-yellow
Overvoltage category
III
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
5.2 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section solid max.
4 mm²
Internal cylindrical gage
A3
Area of application
Railway industry
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
72.2 mm
Stripping length
8 mm ... 10 mm
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 4.0
EC000901
UNSPSC 18.0
39121410
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 7.0
27141141
Number of levels
1
Flammability rating according to UL 94
V0
Insulating material
PA
Maximum load current
with 4 mm² conductor cross section, rigid
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Shock form
Half-sine
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/7,5
36.8 mm
Connection method
Push-in connection
Conductor cross section AWG min.
26
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
ETIM 7.0
EC000901
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Conductor cross section flexible min.
0.14 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ECLASS 9.0
27141141
Height NS 35/15
44.3 mm
Note
Please observe the current carrying capacity of the DIN rails.
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
ETIM 2.0
EC000901
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Conductor cross section AWG max.
12
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141141
ECLASS 5.0
27141100
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Min. AWG conductor cross section, flexible
26
ECLASS 5.1
27141100
ETIM 3.0
EC000901
Ambient temperature (assembly)
-5 °C ... 70 °C
UNSPSC 11
39121410
Connection cross sections directly pluggable
0.34 mm² 4 mm²
ETIM 6.0
EC000901
UNSPSC 19.0
39121410

Product condition