3069267 Phoenix Contact Terminal Blocks

Product Details

• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Color
  gray
• Nominal cross section
  6 mm²
• Maximum load current
  24 A
• Back of the hand protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Tight fit on carrier
  Panel cutout
• Result of temperature-rise test
  Test passed
• Short-time current
  1250 A
• Note
  The conductor cross section depends on the cable lug used
• ASD level
  1.857 (m/s2)2/Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Min. AWG conductor cross section, flexible
  20
• Connection method
  Screw connection
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 5.0
  27141118
• UNSPSC 7.0901
  39121410
ETIM 4.0
EC000901
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Number of positions
12
Maximum power dissipation for nominal condition
1.31 W
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section flexible min.
0.5 mm²
Min. tightening torque of the test socket screw:
0.5 Nm
Max. tightening torque of the test socket screw:
0.6 Nm
ECLASS 4.1
27141118
ETIM 3.0
EC000901
ETIM 7.0
EC002255
UNSPSC 18.0
39121410
Insulating material
PA
Potentials
12
Nominal current IN
24 A
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 1, class B, body mounted
Test duration per axis
5 h
Shock test result
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section flexible max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27440313
ECLASS 6.0
27141141
ETIM 6.0
EC002255
Flammability rating according to UL 94
V0
Note regarding shock protection
When plugged in
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
4 mm²
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock form
Half-sine
Shock duration
30 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Pitch
8.2 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141118
ECLASS 7.0
27440313
ECLASS 9.0
27440313
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Nominal voltage UN
400 V
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Setpoint
5 N
Max. AWG conductor cross section, flexible
14
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27440313
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
ECLASS 5.1
27141120
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Result of thermal test
Test passed
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Acceleration
5g