3069666 Phoenix Contact Terminal Blocks

Product Details

• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 5.1
  27141100
• ETIM 7.0
  EC002555
• Conductor cross section AWG min.
  24
• REACh SVHC
  Lead 7439-92-1
• ECLASS 11.0
  27141148
• ECLASS 7.0
  27141148
• Conductor cross section solid max.
  10 mm²
• Max. AWG conductor cross section, flexible
  8
• UNSPSC 19.0
  20122006
• 2 conductors with same cross section, solid min.
  0.2 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  0.25 mm²
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 4.1
  27141100
• ETIM 4.0
  EC000901
• Test surge voltage
  5 kV
• Potentials
  16
• Number of levels
  1
• Color
  gray
• Overvoltage category
  III
Maximum power dissipation for nominal condition
1.31 W
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Short circuit stability result
Test passed
Short-time current
500 A
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
12 mm
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
2 conductors with same cross section, solid max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Mounting type
Wall mounting
ECLASS 10.0.1
27141148
Flammability rating according to UL 94
V0
Insulating material group
I
Open side panel
No
Setpoint
5 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Width
163 mm
Connection
1 level
Conductor cross section flexible min.
0.2 mm²
Conductor cross section solid min.
0.2 mm²
Min. AWG conductor cross section, flexible
24
ECLASS 9.0
27141148
UNSPSC 6.01
30211811
Number of connections
32
Insulating material
PA
Maximum load current
30 A (with 10 mm² conductor cross section)
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 rpm
Result of voltage-drop test
Test passed
Note
25 pos.
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Shock duration
18 ms
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height
56.5 mm
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Screw thread
M4
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Number of positions
16
Nominal cross section
6 mm²
Rated surge voltage
4 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
4 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Shock test result
Test passed
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Screw connection
Nominal voltage UN
400 V AC/DC
Result of surge voltage test
Test passed
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Pitch
8.2 mm
Length
81 mm
Tightening torque max
1.8 Nm
Tightening torque, min
1.5 Nm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A5
UNSPSC 7.0901
39121410
UNSPSC 21.0
20122006
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 6.0
27141100
UNSPSC 12.01
39121410
UNSPSC 13.2
20122006
ETIM 6.0
EC002555
UNSPSC 11
39121410
UNSPSC 18.0
20122006
ECLASS 4.0
27141100
ECLASS 5.0
27141100
UNSPSC 20.0
20122006