3069996 Phoenix Contact Terminal Blocks

Product Details

• Connection
  1 level
• Stripping length
  10 mm
• Potentials
  7
• Color
  gray
• Overvoltage category
  III
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Acceleration
  5g
• Shock test result
  Test passed
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 4.1
  27141100
• ECLASS 11.0
  27141126
• ECLASS 7.0
  27141126
• UNSPSC 11
  39121410
• UNSPSC 12.01
  39121410
• Nominal cross section
  6 mm²
• Nominal current IN
  24 A
• Terminal block mounting
  0.8 Nm ... 1 Nm
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
4 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Connection method
Screw connection
Conductor cross section flexible min.
0.2 mm²
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid max.
2.5 mm²
Min. tightening torque of the mounting screw:
0.8 Nm
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Pitch
8.2 mm
Tightening torque, min
1.5 Nm
Tightening torque max
1.8 Nm
Max. AWG conductor cross section, flexible
8
2 conductors with same cross section, stranded max.
2.5 mm²
Mounting type
Wall mounting
Max. tightening torque of the mounting screw:
1 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 6.0
27141100
ETIM 3.0
EC000901
Number of connections
14
Rated surge voltage
4 kV
Flammability rating according to UL 94
V0
Short-time current
1250 A
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test spectrum
Service life test category 1, class B, body mounted
Shock form
Half-sine
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
ECLASS 5.0
27141100
Number of levels
1
Maximum load current
30 A (with 10 mm² conductor cross section)
Insulating material group
I
Short circuit stability result
Test passed
Result of thermal test
Test passed
ASD level
1.857 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Plate thickness
1 mm ... 4 mm
Width
139.5 mm
Screw thread
M4
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 10.0.1
27141126
Number of positions
7
Insulating material
PA
Test surge voltage
5 kV
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Number of shocks per direction
3
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Setpoint
5 N
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Maximum power dissipation for nominal condition
1.31 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Open side panel
No
Bending test turns
135
Result of temperature-rise test
Test passed
Height
81 mm
Nominal voltage UN
400 V AC/DC
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Shock duration
30 ms
Test directions
X-, Y- and Z-axis (pos. and neg.)
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Back of the hand protection
guaranteed
Conductor cross section solid max.
10 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
ECLASS 9.0
27141126
ETIM 6.0
EC000902
ETIM 7.0
EC000902
UNSPSC 20.0
39121410
REACh SVHC
Lead 7439-92-1
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 4.0
EC000901
UNSPSC 21.0
39121410
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
UNSPSC 13.2
39121410
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Internal cylindrical gage
A5
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 5.1
27141100
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
Note
The test with ...... mm² / .......A / ...s covers the equirements .......... mm² / ...... A / ...s acc. to IEC 60947-7-1:....-...
Min. AWG conductor cross section, flexible
24
UNSPSC 18.0
39121410
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
UNSPSC 19.0
39121410