3069812 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Color
  gray
• Insulating material
  PA
• Test surge voltage
  5 kV
• Maximum load current
  30 A (with 10 mm² conductor cross section)
• Open side panel
  No
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Length
  100 mm
• Number of connections
  22
• Nominal cross section
  6 mm²
• Overvoltage category
  III
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  1.31 W
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Height
  56.5 mm
Height NS 35/7,5
61.8 mm
Width
122.3 mm
Potentials
11
Rated surge voltage
4 kV
Insulating material group
I
Nominal voltage UN
400 V AC/DC
Height NS 35/15
69.3 mm
Connection
1 level
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Tightening torque, min
1.5 Nm
Screw thread
M4
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
8
Internal cylindrical gage
A5
Pitch
8.2 mm
Tightening torque max
1.8 Nm
Conductor cross section solid max.
10 mm²
Max. AWG conductor cross section, flexible
8
2 conductors with same cross section, stranded min.
0.2 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Number of positions
11
Stripping length
10 mm
Min. AWG conductor cross section, flexible
24
Mounting type
DIN rail mounting
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Screw connection
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section flexible max.
10 mm²
2 conductors with same cross section, solid max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
UNSPSC 13.2
20122006
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141148
ECLASS 5.1
27141100
ETIM 6.0
EC002555
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 4.0
EC000902
UNSPSC 19.0
20122006
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 7.0
27141148
ECLASS 10.0.1
27141148
ECLASS 9.0
27141148
UNSPSC 18.0
20122006
UNSPSC 21.0
20122006
ETIM 7.0
EC002555
UNSPSC 20.0
20122006