3069663 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Insulating material
  PA
• Overvoltage category
  III
• Terminal block mounting
  0.8 Nm ... 1 Nm
• Bending test turns
  135
• Result of temperature-rise test
  Test passed
• Nominal cross section
  6 mm²
• Rated surge voltage
  4 kV
• Maximum power dissipation for nominal condition
  1.31 W
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Flammability rating according to UL 94
  V0
• Maximum load current
  30 A (with 10 mm² conductor cross section)
• Power frequency withstand voltage setpoint
  1.89 kV
• Number of connections
  28
• Color
  gray
• Test surge voltage
  5 kV
• Nominal voltage UN
  400 V AC/DC
• Result of power-frequency withstand voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Bending test rotation speed
  10 rpm
Setpoint
5 N
Short-time current
500 A
Ageing test for screwless modular terminal block temperature cycles
192
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Number of positions
14
Potentials
14
Insulating material group
I
Open side panel
No
Result of surge voltage test
Test passed
Tensile test result
Test passed
Result of tight fit on support
Test passed
Note
25 pos.
Result of aging test
Test passed
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Short circuit stability result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Number of shocks per direction
3
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Test spectrum
Service life test category 2, bogie-mounted
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
12 mm
Connection
1 level
Tightening torque, min
1.5 Nm
Test directions
X-, Y- and Z-axis (pos. and neg.)
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height
56.5 mm
Width
147.6 mm
REACh SVHC
Lead 7439-92-1
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Length
81 mm
Conductor cross section solid min.
0.2 mm²
Internal cylindrical gage
A5
Connection method
Screw connection
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Plate thickness
1 mm ... 4 mm
Screw thread
M4
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Min. tightening torque of the mounting screw:
0.8 Nm
Conductor cross section short circuit testing
4 mm²
Acceleration
30g
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Pitch
8.2 mm
Tightening torque max
1.8 Nm
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Max. tightening torque of the mounting screw:
1 Nm
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
ECLASS 4.0
27141100
UNSPSC 21.0
39121410
ECLASS 11.0
27141126
ECLASS 6.0
27141100
Min. AWG conductor cross section, flexible
24
2 conductors with same cross section, solid min.
0.2 mm²
UNSPSC 11
39121410
UNSPSC 13.2
39121410
ECLASS 5.1
27141100
ETIM 4.0
EC000897
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Mounting type
Wall mounting
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
Max. AWG conductor cross section, flexible
8
2 conductors with same cross section, stranded max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 7.0
27141126
ETIM 6.0
EC000902
ETIM 7.0
EC000902
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
2 conductors with same cross section, solid max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.1
27141100
ECLASS 5.0
27141100
ECLASS 9.0
27141126
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
2 conductors with same cross section, stranded min.
0.2 mm²
ECLASS 10.0.1
27141126
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Conductor cross section solid max.
10 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²