3064072 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Color
  gray
• Degree of pollution
  3
• Nominal voltage UN
  500 V
• Finger protection
  guaranteed
• Bending test rotation speed
  10 rpm
• Tensile test result
  Test passed
• Conductor cross section short circuit testing
  2.5 mm²
• Static insulating material application in cold
  -60 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Height NS 35/15
  56.6 mm
• Tightening torque, min
  1.2 Nm
• Conductor cross section AWG min.
  24
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  6 mm²
• Number of connections
  2
• Insulating material
  PA
• Overvoltage category
  III
• Open side panel
  No
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Stripping length
10 mm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Internal cylindrical gage
A5
ECLASS 4.1
27141100
ECLASS 6.0
27141100
Nominal cross section
6 mm²
Insulating material group
I
Nominal current IN
20 A (with 10 mm² conductor cross section)
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
49.1 mm
Tightening torque max
1.5 Nm
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141126
ECLASS 5.0
27141100
ETIM 2.0
EC000902
ETIM 4.0
EC000902
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Potentials
1
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
1.31 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Width
8.2 mm
Connection method
Screw connection
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible min.
0.2 mm²
Max. AWG conductor cross section, flexible
8
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27141100
ECLASS 7.0
27141126
ETIM 3.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Maximum load current
20 A (with 10 mm² conductor cross section)
Back of the hand protection
guaranteed
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Setpoint
5 N
Short-time current
0.3 kA
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
57.8 mm
Screw thread
M4
Connection in acc. with standard
CSA
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141126
ECLASS 9.0
27141126
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
2 conductors with same cross section, stranded max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 7.0
EC000902
UNSPSC 12.01
39121410
ETIM 6.0
EC000902
UNSPSC 11
39121410
UNSPSC 18.0
39121410