3046689 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  2
• Color
  gray
• Rated surge voltage
  6 kV
• Nominal voltage UN
  500 V
• Result of power-frequency withstand voltage test
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Conductor cross section tensile test
  4 mm²
• Short circuit stability result
  Test passed
• Result of thermal test
  Test passed
• Test spectrum
  Service life test category 1, class B, body mounted
• Acceleration
  5g
• Shock test result
  Test passed
• Static insulating material application in cold
  -60 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Length
  69.9 mm
• Height NS 35/7,5
  65 mm
• Nominal cross section
  2.5 mm²
• Overvoltage category
  III
• Maximum load current
  28 A (with 4 mm² conductor cross section)
• Maximum power dissipation for nominal condition
  0.77 W (the value is multiplied when connecting multiple levels)
Surge voltage test setpoint
7.3 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tractive force setpoint
60 N
Conductor cross section short circuit testing
4 mm²
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
64.4 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section AWG max.
12
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Stripping length
9 mm
Screw thread
M3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
ETIM 7.0
EC000903
UNSPSC 18.0
39121410
Number of connections
4
Flammability rating according to UL 94
V0
Nominal current IN
24 A
Open side panel
Yes
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Setpoint
1 N
Proof of thermal characteristics (needle flame) effective duration
30 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section solid max.
4 mm²
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27141127
ECLASS 9.0
27141127
ETIM 4.0
EC000901
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Insulating material group
I
Result of surge voltage test
Test passed
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Result of tight fit on support
Test passed
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
0.02 g²/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
5.2 mm
Height NS 35/15
72.5 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Tightening torque, min
0.5 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141127
ETIM 3.0
EC000901
ETIM 2.0
EC000901
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Note
The max. current is determined by the diode. Installed: Diode 1N 4007, reverse voltage: 1300 V, maximum continuous current: 0.5 A.
Insulating material
PA
Degree of pollution
3
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Short-time current
0.48 kA
Test duration per axis
5 h
Shock duration
30 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Internal cylindrical gage
A3
Tightening torque max
0.6 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ETIM 6.0
EC000903
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Connection method
Screw connection
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Connection in acc. with standard
CSA
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ECLASS 7.0
27141127
UNSPSC 13.2
39121410