3046032 Phoenix Contact Terminal Blocks

3046032 Product Details

• Insulating material group
  I
• Finger protection
  guaranteed
• Result of tight fit on support
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Testing the rated value of the power dissipation (overload and short circuit Protection)
  Test passed
• Shock form
  Semi-sinusoidal
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Length
  57.8 mm
• Conductor cross section solid max.
  6 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.14 mm²
• Flammability rating according to UL 94
  V0
• Fuse type
  Glass / ceramics / ...
• Contact resistance
  Test passed
• Bending test turns
  135
• Test spectrum
  Service life test category 1, class B, body mounted
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Number of shocks per direction
  3
• Surface flammability NFPA 130 (ASTM E 162)
  passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
73 mm
Conductor cross section AWG max.
10
2 conductors with same cross section, solid min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Stripping length
9 mm
Screw thread
M3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 11.0
27141116
ECLASS 9.0
27141116
ETIM 6.0
EC000899
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Rated operating voltage
250 V
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Actuatiing forces on plug in or lever in fuse insert carriers
Test passed
Result of thermal test
Test passed
ASD level
1.857 (m/s2)2/Hz
Shock test result
Test passed
Shock duration
30 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
6.2 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Open side panel
No
Surge voltage test setpoint
4.8 kV
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
5g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG min.
26
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A4
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141116
ECLASS 4.1
27141100
ETIM 2.0
EC000897
ECLASS 7.0
27141116
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Fuse
G / 5 x 20
Nominal current IN
6.3 A
Note
Swing the locking lever to its final position before replacing the fuse.
Bending test rotation speed
10 rpm
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
80.5 mm
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Connection method
Screw connection
Permissible humidity (storage/transport)
30 % ... 70 %
Tightening torque max
0.8 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 3.0
EC000899
ETIM 4.0
EC000899
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Tightening torque, min
0.6 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27141100
ECLASS 6.0
27141100
ETIM 7.0
EC000899
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Color
black
Degree of pollution
3
Rated surge voltage
6 kV
Maximum load current
6.3 A (the current is determined by the fuse used)
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of temperature-rise test
Test passed
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Nominal cross section
4 mm²
Maximum power dissipation for nominal condition
1.6 W
Connection in acc. with standard
CSA
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Number of connections
2
Overvoltage category
III
Maximum power dissipation
max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload)
Result of surge voltage test
Test passed
Nominal voltage UN
500 V (The voltage is determined by the fuse or selected LED display)
Power frequency withstand voltage setpoint
1.5 kV
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Number of levels
1
Insulating material
PA
Area of application
Railway industry
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3

Product condition