3046184 Phoenix Contact Terminal Blocks

3046184 Product Details

• Max. AWG conductor cross section, flexible
  10
• Tightening torque max
  0.8 Nm
• Length
  57.8 mm
• Potentials
  1
• Insulating material
  PA
• Degree of pollution
  3
• Insulating material group
  I
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of power-frequency withstand voltage test
  Test passed
• Tensile test result
  Test passed
• Result of voltage-drop test
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Open side panel
  Yes
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Result of tight fit on support
  Test passed
• Conductor cross section AWG min.
  26
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.14 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  4 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  0.14 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ECLASS 9.0
27141120
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
5g
Nominal cross section
4 mm²
Maximum power dissipation for nominal condition
1.02 W
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
47.5 mm
Stripping length
9 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Internal cylindrical gage
A4
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 2.0
EC000897
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
Conductor cross section short circuit testing
6 mm²
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Number of levels
1
Color
gray
Rated surge voltage
8 kV
Nominal voltage UN
800 V
Power frequency withstand voltage setpoint
2 kV
Bending test turns
135
Setpoint
1 N
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
End cover width
2.2 mm
Connection method
Screw connection
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27141100
ETIM 3.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 11
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Number of connections
2
Overvoltage category
III
Back of the hand protection
guaranteed
Finger protection
guaranteed
ASD level
0.02 g²/Hz
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
6.2 mm
Screw thread
M3
Connection in acc. with standard
CSA
Conductor cross section flexible max.
6 mm²
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
ECLASS 4.1
27141100
ECLASS 11.0
27141120
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
UNSPSC 18.0
39121410
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Short-time current
0.72 kA
Flammability rating according to UL 94
V0
Maximum load current
41 A (with 6 mm² conductor cross section)
Nominal current IN
32 A
Result of surge voltage test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
UNSPSC 7.0901
39121410
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 6.0
EC000897
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Shock duration
30 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
55 mm
Tightening torque, min
0.6 Nm
Conductor cross section solid max.
6 mm²
Min. AWG conductor cross section, flexible
26
ETIM 4.0
EC000897

Product condition