3046139 Phoenix Contact Terminal Blocks

3046139 Product Details

• Potentials
  1
• Area of application
  Railway industry
• Degree of pollution
  3
• Nominal current IN
  20 A (with 4 mm² conductor cross section)
• Back of the hand protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Conductor cross section tensile test
  6 mm²
• Tensile test result
  Test passed
• Requirements, voltage drop
  U1 ≤ 6,4 mV (1,6 mV x number of conductorclamping units or disconnect unit contactpoints)U2 ≤ 1,5 x U1
• Result of thermal test
  Test passed
• ASD level
  6.12 (m/s2)2/Hz
• Number of connections
  2
• Rated surge voltage
  6 kV
• Maximum power dissipation for nominal condition
  1.02 W
• Nominal voltage UN
  500 V
• Nominal cross section
  4 mm²
• Insulating material
  PA
• Maximum load current
  20 A (with 6 mm² conductor cross section)
• Finger protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Short-time current
0.3 kA
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
57.8 mm
Conductor cross section solid min.
0.14 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ECLASS 7.0
27141126
ETIM 4.0
EC000902
UNSPSC 11
39121410
UNSPSC 7.0901
39121410
Flammability rating according to UL 94
V0
Overvoltage category
III
Shock protection test specification
IEC 60529:2001-02
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Tractive force setpoint
80 N
Short circuit stability result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock test result
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
6.2 mm
Tightening torque, min
0.6 Nm
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
10
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.1
27141100
ETIM 2.0
EC000902
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
Number of levels
1
Color
gray
Insulating material group
I
Open side panel
No
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 32/NS 35
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Screw connection
Stripping length
9 mm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Internal cylindrical gage
A4
Surge voltage test setpoint
7.2 kV
Bending test rotation speed
10 rpm
Setpoint
1 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
56.6 mm
Connection in acc. with standard
CSA
Conductor cross section AWG max.
10
Conductor cross section flexible max.
6 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 4.1
27141100
ETIM 7.0
EC000902
UNSPSC 20.0
39121410
Shock form
Semi-sinusoidal
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
49.1 mm
Screw thread
M3
Tightening torque max
0.8 Nm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
2 conductors with same cross section, solid min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
ECLASS 5.0
27141100
ETIM 3.0
EC000902
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 10.0.1
27141126
ECLASS 6.0
27141100
ECLASS 9.0
27141126
ETIM 6.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410

Product condition