3046142 Phoenix Contact Terminal Blocks

Product Details

• Note
  Current and voltage are determined by the plug used.
• Potentials
  1
• Color
  gray
• Rated surge voltage
  6 kV
• Overvoltage category
  III
• Nominal voltage UN
  500 V
• Back of the hand protection
  guaranteed
• Result of surge voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tensile test result
  Test passed
• Tight fit on carrier
  NS 35
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Short-time current
  0.48 kA
• Oscillation, broadband noise test result
  Test passed
• Test spectrum
  Service life test category 1, class B, body mounted
• ASD level
  1.857 (m/s2)2/Hz
• Number of levels
  1
• Nominal cross section
  4 mm²
• Flammability rating according to UL 94
  V0
• Degree of pollution
  3
Maximum power dissipation for nominal condition
1.28 W
Nominal current IN
20 A (with 4 mm² conductor cross section)
Shock protection test specification
IEC 60529:2001-02
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
4 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock form
Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
57.8 mm
Screw thread
M3
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27141100
ECLASS 9.0
27141126
ETIM 6.0
EC000902
UNSPSC 12.01
39121410
Number of connections
2
Insulating material
PA
Area of application
Railway industry
Insulating material group
I
Maximum load current
20 A (with 6 mm² conductor cross section)
Open side panel
No
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Setpoint
1 N
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
5g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
47.5 mm
Stripping length
9 mm
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
10
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ETIM 3.0
EC000902
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
6.2 mm
Tightening torque max
0.8 Nm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Internal cylindrical gage
A4
ECLASS 10.0.1
27141126
ECLASS 5.0
27141100
ECLASS 7.0
27141126
ETIM 4.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Test duration per axis
5 h
Shock test result
Test passed
Shock duration
30 ms
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/15
55 mm
Tightening torque, min
0.6 Nm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible max.
6 mm²
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Screw connection
Connection in acc. with standard
CSA
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141126
ECLASS 4.0
27141100
ETIM 2.0
EC000902
ETIM 7.0
EC000902
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410