3046171 Phoenix Contact Terminal Blocks

3046171 Product Details

• Result of power-frequency withstand voltage test
  Test passed
• Nominal cross section
  4 mm²
• Color
  gray
• Insulating material group
  I
• Nominal current IN
  20 A (with 4 mm² conductor cross section)
• Bending test turns
  135
• Insulating material
  PA
• Degree of pollution
  3
• Open side panel
  No
• Power frequency withstand voltage setpoint
  1.89 kV
• Tensile test result
  Test passed
• Result of voltage-drop test
  Test passed
• Short-time current
  0.3 kA
• Oscillation, broadband noise test result
  Test passed
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Screw thread
  M3
Connection in acc. with standard
CSA
Max. AWG conductor cross section, flexible
10
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Number of levels
1
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.02 W
Nominal voltage UN
500 V
Finger protection
guaranteed
Result of tight fit on support
Test passed
Setpoint
1 N
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test duration per axis
5 h
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Screw connection
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
ECLASS 4.1
27141100
Potentials
1
Rated surge voltage
6 kV
Maximum load current
20 A (with 6 mm² conductor cross section)
Shock protection test specification
IEC 60529:2001-02
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Conductor cross section short circuit testing
2.5 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/7,5
49.1 mm
Stripping length
9 mm
Conductor cross section solid max.
6 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141126
ECLASS 7.0
27141126
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Number of connections
2
Area of application
Railway industry
Overvoltage category
III
Back of the hand protection
guaranteed
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test spectrum
Service life test category 1, class B, body mounted
Acceleration
5g
Shock test result
Test passed
Number of shocks per direction
3
Width
6.2 mm
Length
57.8 mm
Tightening torque max
0.8 Nm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27141126
ECLASS 6.0
27141100
ECLASS 9.0
27141126
UNSPSC 19.0
39121410
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
1.857 (m/s2)2/Hz
Shock duration
30 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/15
56.6 mm
Tightening torque, min
0.6 Nm
Conductor cross section AWG min.
26
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Internal cylindrical gage
A4
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 3.0
EC000902
ETIM 7.0
EC000902
UNSPSC 20.0
39121410
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ETIM 4.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 11
39121410
UNSPSC 12.01
39121410
ETIM 2.0
EC000902
ETIM 6.0
EC000902
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410

Product condition