3044681 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  4
• Flammability rating according to UL 94
  V0
• Overvoltage category
  III
• Number of levels
  2
• Degree of pollution
  3
• Nominal voltage UN
  500 V
• Result of surge voltage test
  Test passed
• Result of tight fit on support
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Shock form
  Half-sine
• Relative insulation material temperature index (Elec.; UL 746 B)
  130 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• End cover width
  2.2 mm
• Height
  64.4 mm
• Color
  gray
• Maximum power dissipation for nominal condition
  0.77 W (the value is multiplied when connecting multiple levels)
• Open side panel
  Yes
• Checking the mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test turns
  135
Short-time current
0.3 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Acceleration
30g
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
5.2 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Insulating material
PA
Insulating material group
I
Maximum load current
28 A (with 4 mm² conductor cross section)
Shock protection test specification
IEC 60529:2001-02
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 (+/- 2) rpm
Result of temperature-rise test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
69.9 mm
Conductor cross section AWG max.
12
2 conductors with same cross section, solid min.
0.14 mm²
Nominal cross section
2.5 mm²
Rated surge voltage
6 kV
Connection in acc. with standard
CSA
Finger protection
guaranteed
Surge voltage test setpoint
7.3 kV
Result of flexion and pull-out test
Test passed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Test duration per axis
5 h
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/15
72.5 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Stripping length
9 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ETIM 2.0
EC000901
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Nominal current IN
24 A
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Tight fit on carrier
NS 32/NS 35
Conductor cross section short circuit testing
4 mm²
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
65 mm
Connection method
Screw connection
Conductor cross section AWG min.
26
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Screw thread
M3
Tightening torque, min
0.5 Nm
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ECLASS 7.0
27141120
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Internal cylindrical gage
A3
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 9.0
27141120
ETIM 4.0
EC000901
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27141100
ETIM 3.0
EC000901
UNSPSC 7.0901
39121410
UNSPSC 6.01
30211811
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Tightening torque max
0.6 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC 18.0
39121410