3044225 Phoenix Contact Terminal Blocks

3044225 Product Details

• Proof of thermal characteristics (needle flame) effective duration
  30 s
• End cover width
  2.2 mm
• ECLASS 6.0
  27141100
• ECLASS 4.0
  27141100
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  16 mm²
• Width
  16 mm
• Connection method
  Screw connection
• Conductor cross section flexible max.
  50 mm²
• ECLASS 5.1
  27141100
• Shock form
  Half-sine
• ETIM 7.0
  EC000897
• Height
  65.1 mm
• Screw thread
  M6
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  1.5 mm²
• ETIM 3.0
  EC000897
• UNSPSC 18.0
  39121410
• Conductor cross section AWG min.
  16
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 9.0
  27141120
• UNSPSC 6.01
  30211811
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
1.5 mm²
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Insulating material
PA
Maximum power dissipation for nominal condition
4.06 W
Nominal voltage UN
1000 V
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Tensile test result
Test passed
Setpoint
10 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Oscillation, broadband noise test result
Test passed
ASD level
1.857 (m/s2)2/Hz
Shock duration
30 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
73.2 mm
Potentials
1
Area of application
Railway industry
Degree of pollution
3
Open side panel
No
Result of temperature-rise test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
61.2 mm
Number of levels
1
Overvoltage category
III
Nominal current IN
125 A
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Number of connections
2
Color
gray
Insulating material group
I
Maximum load current
150 A (with 50 mm² conductor cross section)
Nominal cross section
35 mm²
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
2.2 kV
Bending test turns
135
Bending test conductor cross section/weight
1.5 mm² / 0.4 kg
Result of thermal test
Test passed
Acceleration
5g
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Short-time current
6 kA
Tightening torque, min
3.2 Nm
Stripping length
18 mm
2 conductors with same cross section, solid min.
1.5 mm²
Conductor cross section solid min.
1.5 mm²
Min. AWG conductor cross section, flexible
16
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
Conductor cross section flexible min.
1.5 mm²
Conductor cross section AWG max.
1/0
Conductor cross section flexible, with ferrule with plastic sleeve max.
35 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ETIM 2.0
EC000897
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
Surface flammability NFPA 130 (ASTM E 162)
passed
Height NS 35/7,5
65.7 mm
Conductor cross section flexible, with ferrule without plastic sleeve max.
35 mm²
2 conductors with same cross section, stranded max.
10 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
10 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Tightening torque max
3.7 Nm
Conductor cross section solid max.
50 mm²
Max. AWG conductor cross section, flexible
1/0
Conductor cross section flexible, with ferrule with plastic sleeve min.
1.5 mm²
Internal cylindrical gage
B9
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
UNSPSC 11
39121410
ECLASS 5.0
27141100
ECLASS 7.0
27141120
Shock test result
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection in acc. with standard
CSA
Conductor cross section flexible, with ferrule without plastic sleeve min.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
2 conductors with same cross section, stranded min.
1.5 mm²
2 conductors with same cross section, solid max.
16 mm²
Conductor cross section short circuit testing
50 mm²
Test directions
X-, Y- and Z-axis (pos. and neg.)
UNSPSC 21.0
39121410

Product condition