3044076 Phoenix Contact Terminal Blocks

3044076 Product Details

• Surge voltage test setpoint
  9.8 kV
• Result of flexion and pull-out test
  Test passed
• Insulating material group
  I
• Power frequency withstand voltage setpoint
  2.2 kV
• Shock form
  Half-sine
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.14 mm²
• 2 conductors with same cross section, stranded max.
  1.5 mm²
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• ECLASS 4.0
  27141100
• ECLASS 5.1
  27141100
• ETIM 2.0
  EC000897
• ETIM 7.0
  EC000897
• UNSPSC 12.01
  39121410
• Maximum power dissipation for nominal condition
  0.77 W
• Finger protection
  guaranteed
• Back of the hand protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Open side panel
  Yes
• Nominal current IN
  24 A
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Setpoint
1 N
Result of temperature-rise test
Test passed
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27141100
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 11
39121410
Overvoltage category
III
Nominal voltage UN
1000 V
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of tight fit on support
Test passed
Bending test turns
135
Oscillation, broadband noise test result
Test passed
2 conductors with same cross section, solid min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
UNSPSC 7.0901
39121410
Short circuit stability result
Test passed
ASD level
1.857 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Rated surge voltage
8 kV
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section short circuit testing
4 mm²
Number of connections
2
Area of application
Railway industry
Tensile test result
Test passed
Tight fit on carrier
NS 35
Acceleration
5g
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Short-time current
0.48 kA
Potentials
1
Flammability rating according to UL 94
V0
Result of power-frequency withstand voltage test
Test passed
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 1, class B, body mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
5.2 mm
Height NS 35/7,5
47.5 mm
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Nominal cross section
2.5 mm²
Color
gray
Length
47.7 mm
Height NS 35/15
55 mm
Conductor cross section flexible min.
0.14 mm²
Connection in acc. with standard
CSA
Max. AWG conductor cross section, flexible
12
UNSPSC 20.0
39121410
Conductor cross section solid min.
0.14 mm²
Shock duration
30 ms
Number of levels
1
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
46.9 mm
Tightening torque, min
0.5 Nm
ETIM 6.0
EC000897
Conductor cross section solid max.
4 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Stripping length
9 mm
Conductor cross section AWG min.
26
ECLASS 5.0
27141100
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Maximum load current
32 A (with 4 mm² conductor cross section)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Degree of pollution
3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Screw connection
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
Conductor cross section flexible max.
4 mm²
End cover width
2.2 mm
Screw thread
M3
Tightening torque max
0.6 Nm
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Insulating material
PA

Product condition