3044571 Phoenix Contact Terminal Blocks

3044571 Product Details

• Potentials
  1
• Tensile test result
  Test passed
• Result of voltage-drop test
  Test passed
• Short-time current
  0.72 kA
• ASD level
  1.857 (m/s2)2/Hz
• Nominal cross section
  4 mm²
• Degree of pollution
  3
• Maximum load current
  39 A (In the case of a 6 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors)
• Nominal voltage UN
  500 V
• Open side panel
  Yes
• Test spectrum
  Service life test category 1, class B, body mounted
• Shock test result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Height
  46.9 mm
• Screw thread
  M3
• Connection in acc. with standard
  CSA
• Conductor cross section solid max.
  6 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.14 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A4
ECLASS 10.0.1
27141120
Color
gray
Insulating material group
I
Result of surge voltage test
Test passed
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Bending test rotation speed
10 rpm
Number of levels
1
Flammability rating according to UL 94
V0
Overvoltage category
III
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Oscillation, broadband noise test result
Test passed
Acceleration
5g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
End cover width
2.2 mm
Tightening torque, min
0.6 Nm
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Connection
1 level
Tightening torque max
0.8 Nm
Conductor cross section flexible min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141100
ECLASS 4.1
27141100
Insulating material
PA
Nominal current IN
32 A
Setpoint
1 N
Short circuit stability result
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
6.2 mm
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
Number of connections
4
Area of application
Railway industry
Rated surge voltage
6 kV
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Shock duration
30 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
65.4 mm
Connection method
Screw connection
Stripping length
9 mm
Conductor cross section solid min.
0.14 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 9.0
27141120
ECLASS 5.1
27141100
ETIM 7.0
EC000897
Maximum power dissipation for nominal condition
1.02 W
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
6 mm²
UNSPSC 18.0
39121410
China RoHS
Environmentally Friendly Use Period = 50 years
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 6.0
27141100
ETIM 3.0
EC000901
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Height NS 35/15
55 mm
Conductor cross section flexible max.
6 mm²
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
10
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Height NS 35/7,5
47.5 mm
UNSPSC 21.0
39121410
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 11
39121410
ETIM 2.0
EC000901
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410

Product condition