3044678 Phoenix Contact Terminal Blocks

Product Details

• UNSPSC 20.0
  39121410
• Nominal cross section
  2.5 mm²
• Flammability rating according to UL 94
  V0
• Overvoltage category
  III
• Maximum load current
  28 A (with 4 mm² conductor cross section)
• Open side panel
  Yes
• Checking the mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of flexion and pull-out test
  Test passed
• Conductor cross section tensile test
  4 mm²
• Color
  gray
• Rated surge voltage
  6 kV
• Nominal current IN
  24 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of surge voltage test
  Test passed
• Bending test turns
  135
• Tight fit on carrier
  NS 35
• Result of temperature-rise test
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock form
  Half-sine
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
64.4 mm
ECLASS 5.0
27141100
Number of connections
4
Degree of pollution
3
Connection in acc. with standard
CSA
Surge voltage test setpoint
7.3 kV
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
End cover width
2.2 mm
Length
69.9 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section AWG max.
12
Internal cylindrical gage
A3
Screw thread
M3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141141
ECLASS 5.1
27141100
ETIM 4.0
EC000901
ETIM 6.0
EC000901
UNSPSC 18.0
39121410
Number of levels
2
Insulating material
PA
Insulating material group
I
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Nominal voltage UN
500 V
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Tractive force setpoint
60 N
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 3.2 mV
Short-time current
0.48 kA
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
5.2 mm
Note
Please observe the current carrying capacity of the DIN rails.
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Tightening torque, min
0.5 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 9.0
27141141
ECLASS 7.0
27141141
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Setpoint
1 N
Conductor cross section short circuit testing
4 mm²
Result of thermal test
Test passed
Acceleration
30g
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
65 mm
Height NS 35/15
72.5 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Tightening torque max
0.6 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 10.0.1
27141141
ECLASS 6.0
27141100
ETIM 3.0
EC000901
UNSPSC 12.01
39121410
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Connection method
Screw connection
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Stripping length
9 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ETIM 2.0
EC000901
ETIM 7.0
EC000901
UNSPSC 11
39121410
UNSPSC 13.2
39121410