3044674 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Connection in acc. with standard
  IEC 60947-7-1
• Insulating material group
  I
• Back of the hand protection
  guaranteed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Result of thermal test
  Test passed
• Test duration per axis
  5 h
• UNSPSC 6.01
  30211811
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Width
  5.2 mm
• End cover width
  2.2 mm
• Conductor cross section AWG min.
  26
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.14 mm²
• 2 conductors with same cross section, solid min.
  0.14 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• Internal cylindrical gage
  A3
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 5.1
  27141100
• ECLASS 6.0
  27141100
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Nominal cross section
2.5 mm²
Nominal current IN
16 A
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Short circuit stability result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
80.1 mm
Height NS 35/7,5
58.1 mm
Conductor cross section flexible min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Connection method
Screw connection
Tightening torque max
0.6 Nm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141126
ETIM 6.0
EC000902
UNSPSC 12.01
39121410
Number of levels
2
Insulating material
PA
Degree of pollution
3
Maximum load current
16 A (in case of a 4 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Result of temperature-rise test
Test passed
Short-time current
0.18 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Semi-sinusoidal
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid max.
4 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Screw thread
M3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Flammability rating according to UL 94
V0
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test rotation speed
10 (+/- 2) rpm
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
1.5 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Stripping length
9 mm
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141126
ECLASS 9.0
27141126
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Number of connections
4
Rated surge voltage
6 kV
Nominal voltage UN
400 V
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
59.1 mm
Height NS 35/15
65.6 mm
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Tightening torque, min
0.5 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 7.0
27141126
ETIM 7.0
EC000902