3044670 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Overvoltage category
  III
• Open side panel
  Yes
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test turns
  135
• Tractive force setpoint
  60 N
• Result of voltage-drop test
  Test passed
• Result of temperature-rise test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Number of levels
  2
• Rated surge voltage
  6 kV
• Connection in acc. with standard
  IEC 60947-7-1
• Back of the hand protection
  guaranteed
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Tensile test result
  Test passed
• Tight fit on carrier
  NS 35
• Requirements, voltage drop
  ≤ 6,4 mV
• Short-time current
  0.18 kA
ASD level
6.12 (m/s2)2/Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
72.5 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Connection method
Screw connection
Tightening torque, min
0.5 Nm
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27141126
ECLASS 6.0
27141100
ETIM 7.0
EC000902
UNSPSC 18.0
39121410
Number of connections
4
Flammability rating according to UL 94
V0
Nominal current IN
16 A
Result of surge voltage test
Test passed
Surge voltage test setpoint
7.3 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Conductor cross section tensile test
4 mm²
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
1.5 mm²
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
30g
Shock test result
Test passed
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
End cover width
2.2 mm
Length
80.1 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Stripping length
9 mm
Tightening torque max
0.6 Nm
ECLASS 5.1
27141100
ECLASS 9.0
27141126
UNSPSC 19.0
39121410
Nominal cross section
2.5 mm²
Insulating material group
I
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section flexible max.
4 mm²
2 conductors with same cross section, solid min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141126
UNSPSC 21.0
39121410
Insulating material
PA
Degree of pollution
3
Maximum load current
16 A (in case of a 4 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Nominal voltage UN
400 V
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Result of flexion and pull-out test
Test passed
Setpoint
5 N
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
64.4 mm
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Screw thread
M3
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 7.0
27141126
UNSPSC 13.2
39121410
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
5.2 mm
Height NS 35/7,5
65 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Internal cylindrical gage
A3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
ETIM 6.0
EC000902
UNSPSC 20.0
39121410