3044640 Phoenix Contact Terminal Blocks

Product Details

• Finger protection
  guaranteed
• Nominal cross section
  2.5 mm²
• Degree of pollution
  3
• Maximum power dissipation for nominal condition
  0.77 W (the value is multiplied when connecting multiple levels)
• Result of surge voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Result of tight fit on support
  Test passed
• Short circuit stability result
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock test result
  Test passed
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Width
  5.2 mm
• Height
  64.4 mm
• Conductor cross section AWG min.
  26
• 2 conductors with same cross section, stranded min.
  0.14 mm²
• Number of connections
  4
• Rated surge voltage
  6 kV
Nominal current IN
22 A
Nominal voltage UN
400 V
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Result of temperature-rise test
Test passed
Short-time current
0.4 kA
Test duration per axis
5 h
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Length
69.9 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Screw thread
M3
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ECLASS 5.1
27141100
UNSPSC 19.0
39121410
Flammability rating according to UL 94
V0
Insulating material group
I
Bending test rotation speed
10 rpm
Tractive force setpoint
60 N
Requirements, voltage drop
≤ 3.2 mV
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
65 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Stripping length
9 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141126
ECLASS 9.0
27141126
ETIM 6.0
EC000902
UNSPSC 20.0
39121410
Number of levels
2
Insulating material
PA
Connection in acc. with standard
IEC 60947-7-1
Open side panel
Yes
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Conductor cross section tensile test
4 mm²
Setpoint
1 N
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
72.5 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG max.
12
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Internal cylindrical gage
A3
Tightening torque max
0.6 Nm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27141126
UNSPSC 13.2
39121410
Color
gray
Overvoltage category
III
Maximum load current
24 A (in case of a 4 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Surge voltage test setpoint
7.3 kV
Power frequency withstand voltage setpoint
1.89 kV
Tensile test result
Test passed
Tight fit on carrier
NS 35
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
4 mm²
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Tightening torque, min
0.5 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 6.0
27141100
UNSPSC 18.0
39121410
Connection method
Screw connection
ECLASS 5.0
27141100
ETIM 7.0
EC000902
UNSPSC 21.0
39121410