3044364 Phoenix Contact Terminal Blocks

3044364 Product Details

• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Result of power-frequency withstand voltage test
  Test passed
• Tensile test result
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Conductor cross section short circuit testing
  6 mm²
• Oscillation, broadband noise test result
  Test passed
• Acceleration
  5g
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Insulating material group
  I
• Finger protection
  guaranteed
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Connection method
  Screw connection
• Conductor cross section solid min.
  0.14 mm²
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Nominal cross section
  4 mm²
• Area of application
  Railway industry
• Maximum power dissipation for nominal condition
  1.02 W
• Back of the hand protection
  guaranteed
Bending test rotation speed
10 rpm
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Height
46.9 mm
Potentials
1
Overvoltage category
III
Nominal current IN
32 A
Open side panel
Yes
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Setpoint
1 N
Short-time current
0.72 kA
ASD level
1.857 (m/s2)2/Hz
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
9 mm
Connection in acc. with standard
CSA
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, solid min.
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Length
57.8 mm
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Static insulating material application in cold
-60 °C
2 conductors with same cross section, stranded max.
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 9.0
27141120
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Color
gray
Rated surge voltage
6 kV
Degree of pollution
3
Maximum load current
41 A (In the case of a 6 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors)
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
6.2 mm
Connection
1 level
Tightening torque, min
0.6 Nm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Number of connections
3
Insulating material
PA
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Nominal voltage UN
500 V
Result of flexion and pull-out test
Test passed
Height NS 35/15
55 mm
Screw thread
M3
Conductor cross section AWG max.
10
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Internal cylindrical gage
A4
ECLASS 11.0
27141120
ECLASS 4.1
27141100
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
Tight fit on carrier
NS 35
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
30 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
End cover width
2.2 mm
Height NS 35/7,5
47.5 mm
Tightening torque max
0.8 Nm
Conductor cross section flexible max.
6 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.1
27141100
ECLASS 6.0
27141100
ETIM 3.0
EC000901
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Conductor cross section solid max.
6 mm²
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ETIM 2.0
EC000901
UNSPSC 11
39121410
UNSPSC 19.0
39121410

Product condition