3044238 Phoenix Contact Terminal Blocks

Product Details

• ECLASS 11.0
  27141120
• ECLASS 4.0
  27141100
• ETIM 3.0
  EC000897
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ETIM 2.0
  EC000897
• UNSPSC 7.0901
  39121410
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• ECLASS 5.0
  27141100
• ECLASS 9.0
  27141120
• UNSPSC 18.0
  39121410
• UNSPSC 11
  39121410
• ECLASS 10.0.1
  27141120
• ECLASS 6.0
  27141100
• Degree of pollution
  3
• Open side panel
  No
• Power frequency withstand voltage setpoint
  2.2 kV
• Potentials
  1
• Rated surge voltage
  8 kV
• Nominal cross section
  35 mm²
• Area of application
  Railway industry
Maximum power dissipation for nominal condition
4.06 W
Nominal current IN
125 A
Result of surge voltage test
Test passed
Bending test turns
135
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
50 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
30 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
16 mm
Height NS 35/7,5
65.7 mm
Stripping length
18 mm
Conductor cross section solid max.
50 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
1.5 mm²
2 conductors with same cross section, solid min.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
10 mm²
Color
blue
Insulating material group
I
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Result of tight fit on support
Test passed
Short-time current
6 kA
Result of temperature-rise test
Test passed
ASD level
1.857 (m/s2)2/Hz
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
65.1 mm
Screw thread
M6
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
Conductor cross section AWG min.
16
Min. AWG conductor cross section, flexible
16
2 conductors with same cross section, stranded max.
10 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
1.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Number of connections
2
Flammability rating according to UL 94
V0
Overvoltage category
III
Maximum load current
150 A (with 50 mm² conductor cross section)
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Setpoint
10 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Connection method
Screw connection
Tightening torque, min
3.2 Nm
Conductor cross section AWG max.
1/0
Conductor cross section solid min.
1.5 mm²
Max. AWG conductor cross section, flexible
1/0
Number of levels
1
Insulating material
PA
Nominal voltage UN
1000 V
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test conductor cross section/weight
1.5 mm² / 0.4 kg
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 1, class B, body mounted
Test duration per axis
5 h
Shock test result
Test passed
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
61.2 mm
Tightening torque max
3.7 Nm
Conductor cross section flexible min.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
35 mm²
2 conductors with same cross section, stranded min.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 5.1
27141100
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
73.2 mm
Connection in acc. with standard
CSA
Conductor cross section flexible max.
50 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
16 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ETIM 7.0
EC000897
UNSPSC 20.0
39121410
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Acceleration
5g
Conductor cross section flexible, with ferrule without plastic sleeve max.
35 mm²
Internal cylindrical gage
B9
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 7.0
27141120
UNSPSC 12.01
39121410
2 conductors with same cross section, solid max.
16 mm²
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410