3044198 Phoenix Contact Terminal Blocks

Product Details

• Back of the hand protection
  guaranteed
• ECLASS 6.0
  27141100
• Open side panel
  Yes
• 2 conductors with same cross section, stranded min.
  1 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  1 mm²
• ECLASS 9.0
  27141120
• Insulating material
  PA
• ECLASS 4.0
  27141100
• 2 conductors with same cross section, stranded max.
  6 mm²
• Nominal current IN
  76 A
• Result of tight fit on support
  Test passed
• Short circuit stability result
  Test passed
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.75 mm²
• Maximum power dissipation for nominal condition
  2.43 W
• Shock protection test specification
  IEC 60529:2001-02
• Maximum load current
  101 A (with 25 mm² conductor cross section)
• Surge voltage test setpoint
  9.8 kV
• Bending test turns
  135
• Tractive force setpoint
  135 N
• Result of temperature-rise test
  Test passed
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
Bending test rotation speed
10 rpm
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Conductor cross section flexible, with ferrule without plastic sleeve max.
16 mm²
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
16 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 7.0
27141120
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Requirements, voltage drop
U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.1
27141100
ETIM 7.0
EC000897
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Conductor cross section tensile test
25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
16 mm²
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Potentials
1
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Permissible humidity (storage/transport)
30 % ... 70 %
Internal cylindrical gage
A7
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
12.2 mm
Height NS 35/15
62.5 mm
2 conductors with same cross section, solid max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
10 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Color
yellow
Area of application
Railway industry
Degree of pollution
3
Short-time current
1.92 kA
Stripping length
14 mm
Connection method
Screw connection
Conductor cross section flexible min.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Min. AWG conductor cross section, flexible
16
Number of levels
1
Overvoltage category
III
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Acceleration
30g
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
End cover width
2.2 mm
Height NS 35/7,5
55 mm
Tightening torque, min
2.5 Nm
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
Conductor cross section solid max.
25 mm²
Nominal cross section
16 mm²
Rated surge voltage
8 kV
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
6 mm²
Flammability rating according to UL 94
V0
Insulating material group
I
Nominal voltage UN
1000 V
Power frequency withstand voltage setpoint
2.2 kV
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
54.4 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
Screw thread
M5
Tightening torque max
3 Nm
Conductor cross section solid min.
1.5 mm²
Conductor cross section AWG max.
4
2 conductors with same cross section, solid min.
1 mm²
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Number of connections
2
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
1.5 mm² / 0.4 kg
Tight fit on carrier
NS 32/NS 35
ASD level
6.12 (m/s2)2/Hz
Proof of thermal characteristics (needle flame) effective duration
30 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Length
55.5 mm
Connection in acc. with standard
CUL
Conductor cross section AWG min.
16
Conductor cross section flexible max.
25 mm²
Max. AWG conductor cross section, flexible
4
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410