3044197 Phoenix Contact Terminal Blocks

Product Details

• Area of application
  Railway industry
• Insulating material group
  I
• Shock protection test specification
  IEC 60529:2001-02
• Surge voltage test setpoint
  9.8 kV
• Bending test rotation speed
  10 rpm
• Tractive force setpoint
  135 N
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of thermal test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• ASD level
  6.12 (m/s2)2/Hz
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Length
  55.5 mm
• Stripping length
  14 mm
• Tightening torque max
  3 Nm
• Conductor cross section flexible max.
  25 mm²
• Insulating material
  PA
• Degree of pollution
  3
• Maximum power dissipation for nominal condition
  2.43 W
• Open side panel
  Yes
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Tight fit on carrier
NS 32/NS 35
Short circuit stability result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
End cover width
2.2 mm
Height NS 35/7,5
55 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG min.
16
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
16 mm²
Maximum load current
101 A (with 25 mm² conductor cross section)
Back of the hand protection
guaranteed
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test turns
135
Result of temperature-rise test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
12.2 mm
Rated surge voltage
8 kV
Nominal voltage UN
1000 V
Power frequency withstand voltage setpoint
2.2 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Requirements, voltage drop
U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
Conductor cross section short circuit testing
16 mm²
Acceleration
30g
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Screw thread
M5
Flammability rating according to UL 94
V0
Overvoltage category
III
Nominal current IN
76 A
Finger protection
guaranteed
Bending test conductor cross section/weight
1.5 mm² / 0.4 kg
Conductor cross section tensile test
25 mm²
Result of voltage-drop test
Test passed
Short-time current
1.92 kA
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
54.4 mm
Tightening torque, min
2.5 Nm
Conductor cross section solid min.
1.5 mm²
Min. AWG conductor cross section, flexible
16
Conductor cross section flexible, with ferrule with plastic sleeve max.
16 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
10 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Height NS 35/15
62.5 mm
Connection method
Screw connection
Conductor cross section flexible min.
1.5 mm²
Max. AWG conductor cross section, flexible
4
2 conductors with same cross section, solid min.
1 mm²
2 conductors with same cross section, solid max.
6 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ECLASS 11.0
27141120
ECLASS 5.0
27141100
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
2 conductors with same cross section, stranded min.
1 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
6 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 13.2
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.75 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Number of connections
2
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
ECLASS 4.0
27141100
ECLASS 6.0
27141100
UNSPSC 11
39121410
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
1 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 9.0
27141120
UNSPSC 21.0
39121410
Number of levels
1
Color
black
Conductor cross section solid max.
25 mm²
Conductor cross section AWG max.
4
2 conductors with same cross section, stranded max.
6 mm²
Internal cylindrical gage
A7
ETIM 4.0
EC000897
Potentials
1
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
Nominal cross section
16 mm²
ECLASS 5.1
27141100