3044188 Phoenix Contact Terminal Blocks

Product Details

• Degree of pollution
  3
• Nominal voltage UN
  1000 V
• Maximum power dissipation for nominal condition
  1.82 W
• 2 conductors with same cross section, stranded max.
  4 mm²
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• ECLASS 11.0
  27141120
• ETIM 3.0
  EC000897
• UNSPSC 11
  39121410
• UNSPSC 21.0
  39121410
• Conductor cross section tensile test
  0.5 mm²
• Max. AWG conductor cross section, flexible
  6
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.5 mm²
• Maximum load current
  76 A (with 16 mm² conductor cross section)
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  10 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• ECLASS 9.0
  27141120
• Internal cylindrical gage
  A6
• ETIM 7.0
  EC000897
• UNSPSC 6.01
  30211811
• UNSPSC 18.0
  39121410
Tight fit on carrier
NS 35
ECLASS 10.0.1
27141120
Nominal current IN
57 A
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ECLASS 4.1
27141100
ETIM 4.0
EC000897
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 20.0
39121410
UNSPSC 13.2
39121410
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
2.5 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
UNSPSC 12.01
39121410
Conductor cross section AWG max.
6
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
6 mm²
Flammability rating according to UL 94
V0
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
2 conductors with same cross section, solid max.
4 mm²
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Requirements, voltage drop
U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Surface flammability NFPA 130 (ASTM E 162)
passed
Height
46.9 mm
Short-time current
1.2 kA
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Connection method
Screw connection
Conductor cross section AWG min.
20
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
10.2 mm
Height NS 35/15
55 mm
Tightening torque max
1.8 Nm
Conductor cross section solid max.
16 mm²
Conductor cross section flexible max.
16 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of thermal test
Test passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
47.5 mm
ECLASS 7.0
27141120
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
47.7 mm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
Number of levels
1
Potentials
1
Rated surge voltage
8 kV
Color
blue
Area of application
Railway industry
Open side panel
Yes
Nominal cross section
10 mm²
Overvoltage category
III
Number of connections
2
Insulating material
PA
Connection in acc. with standard
CSA
Insulating material group
I
Finger protection
guaranteed
Bending test turns
135
Stripping length
10 mm
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of temperature-rise test
Test passed
2 conductors with same cross section, stranded min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.5 mm²
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Tightening torque, min
1.5 Nm
Min. AWG conductor cross section, flexible
20
2 conductors with same cross section, solid min.
0.5 mm²
Surge voltage test setpoint
9.6 kV
Result of flexion and pull-out test
Test passed
Tractive force setpoint
20 N
Setpoint
5 N
Conductor cross section short circuit testing
10 mm²
Screw thread
M4
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Back of the hand protection
guaranteed
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible min.
0.5 mm²