2320092 Phoenix Contact DC/DC Converters
Part#:2320092
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 2
Nov 24, 2024
Primary-switched QUINT DC/DC converter for DIN rail mounting with SFB (Selective Fuse Breaking) Technology, input: 24 V DC, output: 24 V DC/10 A
About the manufacturer: Phoenix Contact is one of the manufacturers that offers DC/DC Converters that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2320092 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Width with alternative assembly 122 mm
- Degree of protection IP20
- Ambient temperature (start-up type tested) -40 °C
- Nominal input voltage range 24 V DC
- Mains buffering time > 12 ms (24 V DC)
- Protective circuit/component Varistor
- POWER BOOST (IBoost) 12.5 A (-25 °C ... 40 °C permanent, UOUT = 24 V DC )
- Connection in parallel Yes, for redundancy and increased capacity
- Active current limitation Approx. 18 A
- Power loss nominal load max. 24 W
- Mounting position horizontal DIN rail NS 35, EN 60715
- Width 48 mm
- Installation distance right/left 0 mm / 0 mm (≤ 70 °C)
- Installation distance right/left (active) 15 mm / 15 mm (≤ 70 °C)
- Degree of pollution 2
- Inrush current < 15 A (typical)
- Nominal output voltage 24 V DC ±1 %
- Connection in series yes
- Max. capacitive load unlimited
- Control deviation < 1 % (change in load, static 10 % ... 90 %)
- Efficiency > 92 %
- Connection method Pluggable screw connection
- ECLASS 9.0 27210901
- Depth 125 mm
- Installation distance top/bottom 50 mm / 50 mm (≤ 70 °C)
- Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing)
- Input voltage range 18 V DC ... 32 V DC
- Type of protection Transient surge protection
- Derating 60 °C ... 70 °C (2.5%/K)
- Feedback voltage resistance 35 V DC
- Residual ripple < 20 mVPP
- Insulation voltage input/output 1.5 kV (type test)
- Conductor cross section solid min. 0.2 mm²
- Conductor cross section AWG max. 12
- EMC requirements for noise emission EN 61000-6-3
- Height with alternative assembly 130 mm
- Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C derating, 2.5 %/K, startup at -40°C type-tested)
- Climatic class 3K3 (in acc. with EN 60721)
- Extended input voltage range in operation 14 V DC ... 18 V DC (Derating)
- Input fuse 25 A (internal (device protection))
- Nominal output current (IN) 10 A (-25 °C ... 60 °C)
- Protection against overvoltage at the output (OVP) < 35 V DC
- Maximum power dissipation in no-load condition 1.6 W
- Net weight 0.9 kg
- Conductor cross section flexible min. 0.2 mm²
- Conductor cross section flexible max. 2.5 mm²
- Stripping length 7 mm
- EMC requirements for noise immunity EN 61000-6-1
- Rail applications EN 50121-4
- Standard – Safety extra-low voltage EN 60950-1 (SELV)
- Electrostatic discharge EN 61000-4-2
- Discharge in air 15 kV (Test Level 4)
- Test field strength 10 V/m (Test Level 3)
- Input 1 kV (Test Level 2 - symmetrical)
- I/O/S asymmetrical
- Criterion B Temporary impairment to operational behavior that is corrected by the device itself.
- ECLASS 4.0 27210900
- ECLASS 5.1 27210900
- ECLASS 11.0 27210901
- Height 130 mm
- Depth with alternative assembly 51 mm
- Installation distance top/bottom (active) 50 mm / 50 mm (≤ 70 °C)
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Current consumption 14 A (24 V, IBOOST)
- Recommended breaker for input protection 16 A ... 20 A (Characteristics B, C, D, K)
- Setting range of the output voltage (USet) 18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
- Selective Fuse Breaking (ISFB) 60 A (12 ms)
- Peak switching voltages nominal load < 10 mVPP (20 MHz)
- Protection class III
- Conductor cross section solid max. 2.5 mm²
- Conductor cross section AWG min. 24
- Standard - Electrical safety EN 60950-1/VDE 0805 (SELV)
- Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN 50178/VDE 0160 (PELV)
- UL approvals UL/C-UL listed UL 508
- Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
- Electromagnetic HF field EN 61000-4-3
- Comments Criterion A
- Fast transients (burst) EN 61000-4-4
- Conducted interference EN 61000-4-6
- Surge voltage load (surge) EN 61000-4-5
- Voltage 10 V (Test Level 3)
- China RoHS Environmentally Friendly Use Period = 25;
- ECLASS 5.0 27210900
- ECLASS 6.0 27210900
- ETIM 6.0 EC002046
- UNSPSC 11 39121004
- UNSPSC 13.2 39121041
- UNSPSC 21.0 39121041
- Assembly instructions alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
- Screw thread M3
- Standard - Safe isolation DIN VDE 0100-410
- Shipbuilding approval DNV GL (EMC B)
- Contact discharge 8 kV (Test Level 4)
- Frequency range 0.15 MHz ... 80 MHz
- Output 1 kV (Test Level 2 - symmetrical)
- Signal 1 kV (Test Level 2 - asymmetrical)
- Criterion A Normal operating behavior within the specified limits.
- REACh SVHC Lead 7439-92-1
- ECLASS 10.0.1 27210901
- ECLASS 4.1 27210900
- ECLASS 7.0 27210901
- ETIM 4.0 EC002542
- UNSPSC 6.01 30211502
- UNSPSC 12.01 39121004
- UNSPSC 18.0 39121041
- UNSPSC 20.0 39121041
- ETIM 7.0 EC002046
- UNSPSC 7.0901 39121004
- UNSPSC 19.0 39121041
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 5 days!
1-year warranty
$510.54
Stock:
2
Select Qty:
$510.54
$510.54 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨