2320186 Phoenix Contact Redundancy Modules

2320186 Product Details

• Width
  38 mm
• Depth with alternative assembly
  41 mm
• Max. permissible relative humidity (operation)
  ≤ 100 % (at 25 °C, non-condensing)
• Nominal input voltage range
  24 V DC
• Nominal output voltage
  0.2 V (< DC input)
• Mounting position
  horizontal DIN rail NS 35, EN 60715
• Width with alternative assembly
  122 mm
• Degree of protection
  IP20
• Installation height
  2000 m
• Nominal output current (IN)
  40 A (Increasing power)
• Connection in series
  No
• MTBF (IEC 61709, SN 29500)
  > 720000 h (40 °C)
• Conductor cross section solid min.
  0.2 mm²
• Screw thread
  M3
• Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
  EN 50178/VDE 0160 (PELV)
• Electrostatic discharge
  EN 61000-4-2
• Comments
  Criterion A
• Conducted interference
  EN 61000-4-6
• Height with alternative assembly
  130 mm
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Climatic class
3K3 (in acc. with EN 60721)
Nominal input current
2x 20 A (-25 °C ... 60 °C)
Power loss nominal load max.
8 W (IOUT = 40 A)
Protection class
III
Conductor cross section flexible max.
4 mm²
Conductor cross section AWG max.
10
UL approvals
UL/C-UL listed UL 508
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Discharge in air
15 kV (Test Level 4)
Input
1 kV (Test Level 2 - symmetrical)
I/O/S
asymmetrical
ECLASS 11.0
27371010
ECLASS 9.0
27371010
ETIM 3.0
EC000599
UNSPSC 6.01
30211502
UNSPSC 12.01
39121004
Depth
125 mm
Installation distance right/left
5 mm / 5 mm
Degree of pollution
2
Input voltage range
18 V DC ... 28 V DC (SELV)
Protection against overvoltage at the output (OVP)
≤ 32 V DC
Net weight
0.6 kg
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG min.
16
EMC requirements for noise emission
EN 61000-6-3
Electromagnetic HF field
EN 61000-4-3
Test field strength
10 V/m (Test Level 3)
Surge voltage load (surge)
EN 61000-4-5
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27250300
ECLASS 5.1
27371000
ETIM 7.0
EC000683
UNSPSC 18.0
32151504
UNSPSC 20.0
32151504
Height
130 mm
Installation distance top/bottom
50 mm / 50 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Maximum input current
2x 26 A (-25°C ... 40°C)
Derating
60 °C ... 70 °C (2.5%/K)
Efficiency
> 98 %
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Conductor cross section solid max.
6 mm²
Stripping length
10 mm
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Fast transients (burst)
EN 61000-4-4
Signal
1 kV (Test Level 2 - asymmetrical)
Voltage
10 V (Test Level 3)
ECLASS 10.0.1
27371010
ECLASS 4.0
27250300
ECLASS 7.0
27371010
ETIM 6.0
EC000683
UNSPSC 11
39121004
UNSPSC 19.0
32151504
UNSPSC 21.0
32151504
Connection method
Screw connection
EMC requirements for noise immunity
EN 61000-6-1
Standard – Safety extra-low voltage
IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Contact discharge
8 kV (Test Level 4)
Frequency range
0.15 MHz ... 80 MHz
Output
1 kV (Test Level 2 - symmetrical)
Criterion A
Normal operating behavior within the specified limits.
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 5.0
27371000
ECLASS 6.0
27371000
ETIM 4.0
EC000599
UNSPSC 7.0901
39121004
UNSPSC 13.2
32151504

Product condition