2320144 Phoenix Contact DC/DC Converters

2320144 Product Details

• Depth
  125 mm
• Installation distance top/bottom
  50 mm / 50 mm (≤ 70 °C)
• Nominal input voltage range
  48 V DC
• Mains buffering time
  > 14 ms (48 V DC)
• POWER BOOST (IBoost)
  6.25 A (-25 °C ... 40 °C permanent, UOUT = 24 V DC )
• Feedback voltage resistance
  35 V DC
• Net weight
  0.7 kg
• Insulation voltage input/output
  1.5 kV (type test)
• Mounting position
  horizontal DIN rail NS 35, EN 60715
• Stripping length
  7 mm
• EMC requirements for noise emission
  EN 61000-6-3
• Standard – Safety extra-low voltage
  EN 60950-1 (SELV)
• Electrostatic discharge
  EN 61000-4-2
• Contact discharge
  8 kV (Test Level 4)
• Input
  1 kV (Test Level 2 - symmetrical)
• Criterion B
  Temporary impairment to operational behavior that is corrected by the device itself.
• ECLASS 5.0
  27210900
• ECLASS 9.0
  27210901
• UNSPSC 11
  39121004
• UNSPSC 20.0
  39121041
Height
130 mm
Installation distance right/left
0 mm / 0 mm (≤ 70 °C)
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Current consumption
3.5 A (48 V DC)
Input fuse
10 A (slow-blow, internal)
Setting range of the output voltage (USet)
18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
Connection in series
yes
Max. capacitive load
unlimited
Peak switching voltages nominal load
< 5 mVPP (20 MHz)
Efficiency
> 91.5 %
Conductor cross section flexible max.
2.5 mm²
EMC requirements for noise immunity
EN 61000-6-1
Rail applications
EN 50121-4
Fast transients (burst)
EN 61000-4-4
Conducted interference
EN 61000-4-6
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 4.0
27210900
ECLASS 4.1
27210900
ETIM 6.0
EC002046
UNSPSC 7.0901
39121004
UNSPSC 19.0
39121041
Width
32 mm
Width with alternative assembly
122 mm
Installation distance right/left (active)
15 mm / 15 mm (≤ 70 °C)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of pollution
2
Input voltage range
30 V DC ... 60 V DC
Nominal output voltage
24 V DC ±1 %
Nominal output current (IN)
5 A (-25 °C ... 60 °C)
Derating
60 °C ... 70 °C (2.5%/K)
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Maximum power dissipation in no-load condition
2.7 W
Connection method
Pluggable screw connection
Conductor cross section flexible min.
0.2 mm²
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Electromagnetic HF field
EN 61000-4-3
Frequency range
0.15 MHz ... 80 MHz
Output
1 kV (Test Level 2 - symmetrical)
Voltage
10 V (Test Level 3)
ECLASS 10.0.1
27210901
ECLASS 5.1
27210900
ETIM 4.0
EC002540
UNSPSC 13.2
39121041
UNSPSC 21.0
39121041
Height with alternative assembly
130 mm
Degree of protection
IP20
Ambient temperature (start-up type tested)
-40 °C
Climatic class
3K3 (in acc. with EN 60721)
Type of protection
Transient surge protection
Selective Fuse Breaking (ISFB)
30 A (12 ms)
Protection against overvoltage at the output (OVP)
< 35 V DC
Residual ripple
< 25 mVPP
Protection class
III
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Screw thread
M3
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
UL approvals
UL/C-UL listed UL 508
Discharge in air
15 kV (Test Level 4)
Test field strength
10 V/m (Test Level 3)
Signal
1 kV (Test Level 2 - asymmetrical)
I/O/S
asymmetrical
ECLASS 11.0
27210901
ECLASS 6.0
27210900
ETIM 7.0
EC002046
UNSPSC 12.01
39121004
Depth with alternative assembly
35 mm
Installation distance top/bottom (active)
50 mm / 50 mm (≤ 70 °C)
Inrush current
< 5 A (typical)
Recommended breaker for input protection
10 A ... 16 A (Characteristics B, C, D, K)
Protective circuit/component
Varistor
Connection in parallel
Yes, for redundancy and increased capacity
Active current limitation
Approximately 6.9 A
Power loss nominal load max.
11 W
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Conductor cross section solid max.
2.5 mm²
Conductor cross section AWG max.
12
Standard - Safe isolation
DIN VDE 0100-410
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Comments
Criterion A
Surge voltage load (surge)
EN 61000-4-5
Criterion A
Normal operating behavior within the specified limits.
REACh SVHC
Lead 7439-92-1
ECLASS 7.0
27210901
UNSPSC 6.01
30211502
UNSPSC 18.0
39121041

Product condition