1162144 Phoenix Contact Electrical Wires & Cables

1162144 Product Details

• Withdrawal force
  < 100 N
• Note
  A protective cap is supplied as standard for the DC and AC contacts.
• Ambient temperature (operation)
  -40 °C ... 80 °C
• Maximum charging power
  200 kW
• Rated current for signal contacts
  2 A
• Insertion/withdrawal cycles
  > 10000
• Design
  Generation 4
• Note on the connection method
  Crimp connection, cannot be disconnected
• Conductor length
  2 m (AC cables)
• Charging standard
  CCS type 2
• Bore dimensions
  117.65 mm x 90 mm, 117.65 mm x 83 mm
• Degree of protection
  IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
• Rated current of power contacts
  32 A AC
• Type of signal transmission
  Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121
• Insertion force
  < 100 N
• Mounting hole diameter
  6.80 mm (ø)
• Flammability rating
  V0
• Cable structure
  4 x 0.5 mm²
• External sheath, color
  Green-yellow
• Maximum voltage for locking detection
  12 V
Cable length
1 m
Recommended measured current
≤ 1 mA (Umax= 16 V DC)
Resistance range
650 Ω ... 1450 Ω
Charging mode
Mode 2, 3, 4
Application
For charging with alternating current (AC) and with direct current (DC)
Height
140.25 mm
Max. altitude
4000 m (above sea level)
Rated voltage for power contacts
480 V AC
Rated voltage for signal contacts
30 V AC
Temperature measurement
DC contacts: 2x PT1000 (DIN EN 60751)
Mounting position of the locking actuator
Right-side
Design line
Generation 4
Cable resistance
≤ 37.1 Ω/km
Cable weight
7 kg/km
Possible power supply range at the motor
9 V ... 16 V
Max. dwell time with reverse current
1 s
Type of sensor
Pt 1000
China RoHS
Environmentally Friendly Use Period = 10;
ECLASS 9.0
27144706
Type
Locking actuator right
Standards/regulations
DIN EN 60751
Width
108 mm
Depth
128.4 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Number of phases
3
Number of signal contacts
2 (CP, PP)
Resistor coding
4.7 kΩ (between PE and PP)
Temperature monitoring
AC contacts: PTC chain (DIN˽EN˽60738-1)
Required mounting screws
M6
Housing color
black
Locking type
Locking in the inserted state with a locking mechanism
Outer sheath, material
PVC
Single wire, color
black PP/CS
Recommended adaptation time
600 ms
Lock recognition
available
Temperature range
-40 °C ... 130 °C
ECLASS 11.0
27144706
Type of charging current
DC, AC 3-phase
Number of power contacts
7 (L1, L2, L3, N, PE, DC+, DC-)
Insulation resistance of neighboring contacts
> 200 MΩ
Restrictions to mounting position
Only 0 to 90 degree frontal inclination possible, see figure
Customer variations
On request
Material
Plastic
External cable diameter
1.6 mm -0.2 mm
Operating voltage
12 V (Typical power supply at the motor)
Reverse current of the motor
max. 1.5 A
Pause time after entry or exit path
3 s
Mechanical emergency release
available
Screws included in the scope of delivery
none
Material surface of contacts
Ag
Minimum bending radius
15 mm
Number of positions of theconnectors
4
Typical motor current for locking
0.25 A
Service life insertion cycles
> 10000 load cycles
Tolerance at the sensor with the recommended measured current
±5K
ECLASS 10.0.1
27144706

Product condition