1136245 Phoenix Contact Relays

1136245 Product Details

• Depth
  94 mm
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (operation)
  -40 °C ... 55 °C
• Typical response time
  7 ms
• Protective circuit
  RC element
• Minimum switching voltage
  5 V (10 mA)
• Interrupting rating (ohmic load) max.
  144 W (24 V DC)
• Operating mode
  100% operating factor
• Conductor cross section flexible (2 conductors with same cross section)
  0.5 mm² ... 1 mm²
• Type of note
  Assembly instruction:
• Note
  The PLC-ATP separating plate is required at the start and end of every PLC terminal strip.
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Maximum altitude
  ≤ 2000 m
• Typical release voltage
  60 V AC/DC
• Contact type
  2 changeover contacts
• Contact material
  AgNi
• Limiting continuous current
  6 A
• Mechanical service life
  approx. 3x 107 cycles
• Switching capacity
  2 A (DC13, 24 V)
• Conductor cross section AWG
  26 ... 14
Height
80 mm
Typical input current at UN
8.5 mA (50 Hz)
Typical release time
10 ms
Maximum switching voltage
250 V AC/DC
Mounting position
any
Stripping length
8 mm
Rated insulation voltage
250 V AC
Overvoltage category
III
ECLASS 11.0
27371601
Width
14 mm
Mains frequency
50/60 Hz
Status display
Yellow LED
Maximum inrush current
15 A (300 ms, N/O contact)
Switching capacity min.
0.12 W
Assembly instructions
In rows with zero spacing
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Insulation
Basic insulation
Pollution degree
2
Nominal input voltage UN
230 V AC
Degree of protection
IP20 (Relay base)
Coil voltage
110 V DC
Type of switch contact
Single contact
Min. switching current
10 mA (5 V)
Test voltage
4 kVrms (50 Hz, 1 min., winding/contact)
Connection method
Push-in connection
Standards/regulations
DIN EN 50178
Rated surge voltage
4 kV (Safe isolation, reinforced insulation, and 6 kV between input circuit and output contact current paths)
ECLASS 10.0.1
27371601
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
Designation
Corrosive gas test
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 9.0
27371601

Product condition