3010013 Phoenix Contact Terminal Blocks

Product Details

• Overvoltage category
  III
• Conductor cross section short circuit testing
  95 mm²
• Acceleration
  30g
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Static insulating material application in cold
  -60 °C
• Width
  25 mm
• Screw thread
  M8
• Stripping length
  33 mm
• Conductor cross section AWG min.
  4
• Min. AWG conductor cross section, flexible
  2
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  35 mm²
• 2 conductors with same cross section, solid min.
  25 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  16 mm²
• ECLASS 11.0
  27141120
• ECLASS 7.0
  27141120
• Color
  gray
• Degree of pollution
  3
• Power frequency withstand voltage setpoint
  2.2 kV
• Bending test conductor cross section/weight
  25 mm² / 4.5 kg
• Conductor cross section tensile test
  95 mm²
Requirements, voltage drop
U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/15
97.5 mm
Tightening torque, min
15 Nm
Conductor cross section flexible min.
35 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
35 mm²
Cross section with insertion bridge, solid max.
95 mm²
2 conductors with same cross section, stranded max.
35 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
35 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Rated surge voltage
8 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Shock form
Half-sine
ECLASS 4.1
27141100
ECLASS 5.0
27141100
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
Conductor cross section flexible max.
95 mm²
Conductor cross section AWG max.
3/0
Cross section with insertion bridge, stranded max.
70 mm²
2 conductors with same cross section, stranded min.
25 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 11
39121410
Finger protection
guaranteed
Tight fit on carrier
NS 32/NS 35
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Flammability rating according to UL 94
V0
Maximum load current
232 A
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 32
95 mm
Connection method
Screw connection
Conductor cross section solid min.
25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
95 mm²
2 conductors with same cross section, solid max.
35 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ETIM 2.0
EC000897
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 12.01
39121410
Insulating material
PA
Insulating material group
I
Result of power-frequency withstand voltage test
Test passed
Tractive force setpoint
351 N
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
83 mm
Connection in acc. with standard
CSA
Conductor cross section solid max.
95 mm²
Max. AWG conductor cross section, flexible
3/0
Conductor cross section flexible, with ferrule with plastic sleeve max.
95 mm²
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Short-time current
11.4 kA
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
90 mm
Tightening torque max
20 Nm
Maximum power dissipation for nominal condition
7.54 W
Nominal voltage UN
1000 V
Number of levels
1
Nominal current IN
232 A
Bending test rotation speed
10 rpm
Open side panel
No
Shock protection test specification
IEC 60529:2013-08
Tensile test result
Test passed
Potentials
1
Nominal cross section
95 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
Back of the hand protection
guaranteed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of connections
2
Terminal block mounting
15 Nm ... 20 Nm
Result of surge voltage test
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3