1136242 Phoenix Contact Control Relays
Part#:1136242
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
PLC-INTERFACE for protection against interference currents or interference voltages on the control side. Consisting of basic terminal block with Push-in connection and plug-in miniature relay with power contact up to 10 A, 1 changeover contact, 230 V AC i
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Control Relays that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1136242 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Width 14 mm
- Degree of protection IP20 (Relay base)
- Typical release voltage 60 V AC
- Contact material AgNi
- Limiting continuous current 6 A
- Switching capacity 2 A (DC13, 24 V)
- Assembly instructions In rows with zero spacing
- Conductor cross section AWG 26 ... 14
- Pollution degree 2
- ECLASS 9.0 27371601
- Note The PLC-ATP separating plate is required at the start and end of every PLC terminal strip.
- Ambient temperature (operation) -40 °C ... 55 °C
- Typical response time 7 ms
- Status display Yellow LED
- Maximum switching voltage 250 V AC/DC
- Interrupting rating (ohmic load) max. 144 W (24 V DC)
- Mechanical service life approx. 3x 107 cycles
- Conductor cross section solid 0.14 mm² ... 2.5 mm²
- Rated insulation voltage 250 V AC
- Overvoltage category III
- ECLASS 11.0 27371601
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Depth 94 mm
- Typical input current at UN 8.5 mA (50 Hz)
- Contact type 1 changeover contact
- Maximum inrush current 30 A (300 ms, N/O contact)
- Test voltage 4 kVrms (50 Hz, 1 min., winding/contact)
- Connection method Push-in connection
- Standards/regulations DIN EN 50178
- Designation Corrosive gas test
- China RoHS Environmentally Friendly Use Period = 50 years
- REACh SVHC Lead 7439-92-1
- Type of note Assembly instruction:
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Mains frequency 50/60 Hz
- Typical release time 10 ms
- Protective circuit RC element
- Min. switching current 10 mA (12 V)
- Operating mode 100% operating factor
- Stripping length 8 mm
- Conductor cross section flexible (2 conductors with same cross section) 0.5 mm² ... 1 mm²
- Insulation Basic insulation
- Identification ISA-S71.04. G3 Harsh Group
- Height 80 mm
- Maximum altitude ≤ 2000 m
- Nominal input voltage UN 230 V AC
- Coil voltage 110 V DC
- Type of switch contact Single contact
- Minimum switching voltage 12 V (10 mA)
- Mounting position any
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- Rated surge voltage 4 kV (Safe isolation, reinforced insulation, and 6 kV between input circuit and output contact current paths)
- ECLASS 10.0.1 27371601
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
