1136244 Phoenix Contact Relays
Part#:1136244
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: PLC-INTERFACE for protection against interference currents or interference voltages on the control side. Consisting of basic terminal block with Push-in connection and plug-in miniature relay with power contact up to 2x 8 A, 2 changeover contacts, 120 V A
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Relays that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1136244 Phoenix Contact price in the box on the right side or send a quick quote.
1136244 Product Details
- Contact type 2 changeover contacts
- Min. switching current 10 mA (5 V)
- Mechanical service life approx. 3x 107 cycles
- Conductor cross section solid 0.14 mm² ... 2.5 mm²
- Rated insulation voltage 250 V AC
- Overvoltage category III
- ECLASS 11.0 27371601
- Note The PLC-ATP separating plate is required at the start and end of every PLC terminal strip.
- Ambient temperature (operation) -40 °C ... 55 °C
- Maximum altitude ≤ 2000 m
- Mains frequency 50/60 Hz
- Typical release voltage 50 V AC
- Status display Yellow LED
- Protective circuit RC element
- Maximum switching voltage 250 V AC/DC
- Limiting continuous current 6 A
- Test voltage 4 kVrms (50 Hz, 1 min., winding/contact)
- Conductor cross section AWG 26 ... 14
- Rated surge voltage 4 kV (Safe isolation, reinforced insulation, and 6 kV between input circuit and output contact current paths)
- REACh SVHC Lead 7439-92-1
- Type of note Assembly instruction:
- Height 80 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Nominal input voltage UN 120 V AC
- Typical response time 7 ms
- Coil voltage 110 V DC
- Contact material AgNi
- Minimum switching voltage 5 V (10 mA)
- Switching capacity min. 0.12 W
- Connection method Push-in connection
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- Insulation Basic insulation
- ECLASS 10.0.1 27371601
- ECLASS 9.0 27371601
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Width 14 mm
- Depth 94 mm
- Degree of protection IP20 (Relay base)
- Typical input current at UN 6 mA (50 Hz)
- Typical release time 10 ms
- Type of switch contact Single contact
- Maximum inrush current 15 A (300 ms, N/O contact)
- Operating mode 100% operating factor
- Mounting position any
- Conductor cross section flexible (2 conductors with same cross section) 0.5 mm² ... 1 mm²
- Designation Corrosive gas test
- Pollution degree 2
- Interrupting rating (ohmic load) max. 144 W (24 V DC)
- Assembly instructions In rows with zero spacing
- Stripping length 8 mm
- Standards/regulations DIN EN 50178
- Identification ISA-S71.04. G3 Harsh Group
- China RoHS Environmentally Friendly Use Period = 50 years
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
1136244
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
