1125988 Phoenix Contact Relays
Part#:1125988
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 20
Apr 24, 2024
About the product: PLC-INTERFACE for protection against interference currents/voltages on the control side. Consisting of PLC-BPT-120UC/21/SO46 basic terminal block with Push-in connection and plug-in miniature relay with power contact up to 6 A, 1 changeover contact, 120 V
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Relays that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1125988 Phoenix Contact price in the box on the right side or send a quick quote.
1125988 Product Details
- Mains frequency 50/60 Hz
- Type of note Notes on operation
- Width 6.2 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Typical response time 7 ms
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Depth 94 mm
- Maximum altitude ≤ 2000 m
- Nominal input voltage UN 120 V AC
- Typical input current at UN 7 mA (50 Hz)
- Protective circuit Bridge rectifier
- Contact type 1 changeover contact
- Contact material AgSnO
- Min. switching current 10 mA (12 V)
- Switching capacity min. 0.12 W
- Operating mode 100% operating factor
- Mounting position any
- Stripping length 8 mm
- Conductor cross section solid 0.14 mm² ... 2.5 mm²
- Standards/regulations DIN EN 50178
- Pollution degree 2
- REACh SVHC Lead 7439-92-1
- ECLASS 10.0.1 27371601
- Note The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built-in device without protection against direct contact.
- Height 80 mm
- Ambient temperature (operation) -40 °C ... 55 °C
- Degree of protection RT III (Relay)
- Typical release voltage 50 V AC
- Coil voltage 60 V DC
- Maximum switching voltage 250 V AC/DC
- Maximum inrush current 10 A (4 s)
- Limiting continuous current 6 A
- Test voltage 4 kVrms (50 Hz, 1 min., winding/contact)
- Mechanical service life 2x 107 cycles
- Connection method Push-in connection
- Conductor cross section AWG 26 ... 14
- Designation Corrosive gas test
- Rated surge voltage 6 kV
- Overvoltage category III
- ECLASS 11.0 27371601
- ECLASS 9.0 27371601
- Typical release time 20 ms
- Status display Yellow LED
- Type of switch contact Single contact
- Minimum switching voltage 5 V (100 mA)
- Interrupting rating (ohmic load) max. 140 W (24 V DC)
- Switching capacity 2 A (at 24 V, DC13)
- Assembly instructions In rows with zero spacing
- Connection name Contact side
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- Rated insulation voltage 250 V AC
- Insulation Safe isolation, reinforced insulation
- Identification ISA-S71.04. G3 Harsh Group
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
This item can ship within 24h!
1-year warranty
$31.87
1125988
Stock:
20
Select Qty:
$31.87
$31.87 each
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨