1125984 Phoenix Contact Relays
Part#:1125984
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: PLC-INTERFACE for protection against interference currents/voltages on the control side. Consisting of PLC-BSC-230UC/ 1/SEN/SO46 basic terminal block with screw connection and plug-in miniature relay with multi-layer gold contact, 1 N/O contact, 230 V AC
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Relays that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1125984 Phoenix Contact price in the box on the right side or send a quick quote.
1125984 Product Details
- Height 80 mm
- Degree of protection IP20 (Relay base)
- Protective circuit Bridge rectifier
- Minimum switching voltage 100 mV (at 10 mA)
- Interrupting rating (ohmic load) max. 1.2 W (24 V DC)
- Mounting position any
- Connection name Coil side
- Conductor cross section solid 0.14 mm² ... 2.5 mm²
- Identification ISA-S71.04. G3 Harsh Group
- ECLASS 10.0.1 27371601
- Note If the specified maximum values for multi-layer contact relays are exceeded, the gold plating is destroyed. The maximum values of the power contact relay are then valid. This can result in a shorter service life than with a pure power contact.
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Mains frequency 50/60 Hz
- Typical release voltage 80 V AC
- Status display Yellow LED
- Maximum switching voltage 30 V AC
- Mechanical service life 2x 107 cycles
- Connection method Screw connection
- Rated surge voltage 6 kV
- Overvoltage category III
- REACh SVHC Lead 7439-92-1
- Type of note Notes on operation
- Maximum altitude ≤ 2000 m
- Typical input current at UN 8.8 mA (50 Hz)
- Typical release time 20 ms
- Contact material AgSnO, hard gold-plated
- Min. switching current 1 mA (at 24 V)
- Switching capacity min. 0.12 W
- Screw thread M3
- Standards/regulations EN 61810
- Rated insulation voltage 250 V AC
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Width 6.2 mm
- Ambient temperature (operation) -40 °C ... 55 °C
- Nominal input voltage UN 230 V AC
- Coil voltage 60 V DC
- Contact type 1 N/O contact
- Maximum inrush current 50 mA
- Test voltage 4 kVrms (50 Hz, 1 min., winding/contact)
- Stripping length 8 mm
- Designation Corrosive gas test
- Pollution degree 2
- ECLASS 9.0 27371601
- Depth 94 mm
- Typical response time 7 ms
- Type of switch contact Single contact
- Limiting continuous current 50 mA
- Operating mode 100% operating factor
- Assembly instructions In rows with zero spacing
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- Insulation Safe isolation, reinforced insulation
- ECLASS 11.0 27371601
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
1125984
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨