1125943 Phoenix Contact Relays
Part#:1125943
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Checking verified in-stock parts...
About the product: PLC-INTERFACE for protection against interference currents/voltages on the control side. Consisting of PLC-BSC-230UC/21HC/SO46 basic terminal block with screw connection and plug-in miniature relay with power contact up to 10 A, 1 changeover contact, 230
About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.
Check out the 1125943 Phoenix Contact price in the box on the right side or send a quick quote.
1125943 Product Details
- Note The PLC-ATP separating plate is required at the start and end of every PLC terminal strip.
- Ambient temperature (operation) 55 °C
- Typical input current at UN 8.5 mA (50 Hz)
- Typical release voltage 60 V AC
- Status display Yellow LED
- Min. switching current 10 mA (12 V)
- Switching capacity 2 A (DC13, 24 V)
- Mounting position any
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- Designation Corrosive gas test
- Rated surge voltage 4 kV (Safe isolation, reinforced insulation, and 6 kV between input circuit and output contact current paths)
- REACh SVHC Lead 7439-92-1
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Typical response time 7 ms
- Contact type 1 changeover contact
- Interrupting rating (ohmic load) max. 144 W (24 V DC)
- Test voltage 4 kVrms (50 Hz, 1 min., winding/contact)
- Stripping length 8 mm
- Rated insulation voltage 250 V AC
- Identification ISA-S71.04. G3 Harsh Group
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 9.0 27371601
- Depth 94 mm
- Nominal input voltage UN 230 V AC
- Protective circuit RC element
- Minimum switching voltage 12 V (10 mA)
- Operating mode 100% operating factor
- Assembly instructions In rows with zero spacing
- Standards/regulations DIN EN 50178
- Overvoltage category III
- ECLASS 11.0 27371601
- Type of note Assembly instruction:
- Width 14 mm
- Maximum altitude ≤ 2000 m
- Mains frequency 50/60 Hz
- Coil voltage 110 V DC
- Contact material AgNi
- Maximum inrush current 30 A (300 ms, N/O contact)
- Limiting continuous current 6 A
- Conductor cross section flexible (2 conductors with same cross section) 0.5 mm² ... 1 mm²
- Insulation Basic insulation
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Height 80 mm
- Degree of protection IP20 (Relay base)
- Typical release time 10 ms
- Type of switch contact Single contact
- Maximum switching voltage 250 V AC/DC
- Mechanical service life approx. 3x 107 cycles
- Connection method Screw connection
- Conductor cross section solid 0.14 mm² ... 2.5 mm²
- Conductor cross section AWG 26 ... 14
- Pollution degree 2
- ECLASS 10.0.1 27371601
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Shipping and Delivery Worldwide
calculate cost and time at Checkout
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨