1125985 Phoenix Contact Relays
Part#:1125985
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: PLC-INTERFACE for protection against interference currents/voltages on the control side. Consisting of PLC-BSC-120UC/21-21/SO46 basic terminal block with screw connection and plug-in miniature relay with power contact up to 2x 8 A, 2 changeover contacts,
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Relays that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1125985 Phoenix Contact price in the box on the right side or send a quick quote.
1125985 Product Details
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (operation) -40 °C ... 55 °C
- Degree of protection RT III (Relay)
- Typical release voltage 50 V AC
- Type of switch contact Single contact
- Limiting continuous current 6 A
- Test voltage 4 kVrms (50 Hz, 1 min., winding/contact)
- Mains frequency 50/60 Hz
- Coil voltage 110 V DC
- Maximum switching voltage 250 V AC/DC
- Minimum switching voltage 5 V (10 mA)
- Operating mode 100% operating factor
- Mounting position any
- Conductor cross section solid 0.14 mm² ... 2.5 mm²
- Rated insulation voltage 250 V AC
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- Type of note Notes on operation
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Maximum altitude ≤ 2000 m
- Typical response time 7 ms
- Protective circuit Bridge rectifier
- Contact material AgNi
- Interrupting rating (ohmic load) max. 144 W (24 V DC)
- Mechanical service life 3x 107 cycles
- Connection name Contact side
- Stripping length 8 mm
- Conductor cross section AWG 26 ... 14
- Rated surge voltage 4 kV (Safe isolation, reinforced insulation, and 6 kV between input circuit and output contact current paths)
- ECLASS 11.0 27371601
- Width 14 mm
- Depth 94 mm
- Typical release time 10 ms
- Contact type 2 changeover contacts
- Maximum inrush current 15 A (300 ms)
- Switching capacity 2 A (at 24 V, DC13)
- Screw thread M3
- Standards/regulations DIN EN 50178
- Identification ISA-S71.04. G3 Harsh Group
- ECLASS 9.0 27371601
- Note The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built-in device without protection against direct contact.
- Height 80 mm
- Nominal input voltage UN 120 V AC
- Typical input current at UN 6 mA (50 Hz)
- Status display Yellow LED
- Min. switching current 10 mA (5 V)
- Switching capacity min. 0.12 W
- Assembly instructions In rows with zero spacing
- Designation Corrosive gas test
- Pollution degree 2
- Overvoltage category III
- ECLASS 10.0.1 27371601
- Connection method Screw connection
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- Insulation Basic insulation
- REACh SVHC Lead 7439-92-1
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
1125985
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨