1104545 Phoenix Contact Programmable Logic Controllers

1104545 Product Details

• Width
  35 mm
• Height
  126.1 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Designation
  Feed-in of supply voltage (UI)
• Color
  traffic grey A RAL 7042
• Note on dimensions
  The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715).
• Permissible humidity (storage/transport)
  5 % ... 95 % (non-condensing)
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Conductor cross section flexible min.
  0.2 mm²
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section AWG min.
  24
• Mounting type
  DIN rail
• Note on weight specifications
  with connectors and bus base module
• Output buffer
  1 kByte
• Immunity to ESD
  Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
• Mechanical tests
  Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
• ECLASS 10.0.1
  27242608
• Depth
  54 mm
• Degree of protection
  IP20
Connection method
Push-in connection
Note on the connection method
Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
Conductor cross section AWG max.
16
Conductor cross section flexible max.
1.5 mm²
Degree of pollution
2 (IEC 60664-1, EN 60664-1)
Net weight
124.3 g
Transmission speed
100 Mbps
Data bits
8
Transmission physics
Copper
Power consumption
max. 6 W (depending on the number of devices (for unit loads, see the table below “Additional data”) on the M-Bus, of which 20% is internal losses)
Current consumption
max. 410 mA
Protective circuit
Surge protection electronic (35 V, 0.5 s)
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
REACh SVHC
Lead 7439-92-1
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Stripping length
8 mm
Input buffer
1 kByte
Test section
5 V supply of the local bus (UBus) / 24 V supply (I/Os) 500 V AC 50 Hz 1 min.
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Interference emission
Noise emission test according to EN 61000-6-3 Class B
Ambient temperature (operation)
-25 °C ... 60 °C
Stop bits
1
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B; DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical), M-Bus: 1 kV, 42 Ω (asymmetrical)
Overvoltage category
II (IEC 60664-1, EN 60664-1)
ECLASS 11.0
27242608
Conductor cross section solid max.
1.5 mm²
Mounting position
any (no temperature derating)
Number
2
Supply voltage
24 V DC
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
ECLASS 9.0
27242608

Product condition