1104889 Phoenix Contact Electrical Safety Devices

1104889 Product Details

• Width
  22.61 mm
• Max. permissible relative humidity (operation)
  95 % (non-condensing)
• Indication
  2 x LED (red)
• Ambient temperature (storage/transport)
  -20 °C ... 85 °C
• Maximum altitude
  ≤ 2000 m (Above sea level)
• Protective circuit
  Serial protection against polarity reversal
• Input voltage range "1" signal
  11 V DC ... 28.8 V DC
• Number of outputs
  4
• Nominal output voltage range
  18.5 V DC ... 28.1 V DC (US - 0,7 V)
• Output voltage when switched off
  max. 0.1 V
• Discharging circuit
  Yes, internal
• Maximum inrush current
  1.1 A (Δt = 3 s  at Us)
• Response time
  see user manual
• Nominal operating mode
  100% operating factor
• Protection class
  III (EN 50178)
• Depth
  113.6 mm
• Designation
  Air clearances and creepage distances between the power circuits
• Current consumption
  typ. 12 mA (typically with US)
• Description of the input
  configurable (as signal output or reset input)
• Max. permissible overall conductor resistance
  1.2 kΩ (Input and reset circuit at US)
Output name
O1, O2, O3, O4
Leakage current
max. 100 µA
Switching frequency
max. 1/4 x tCycle [Hz]
Conductor cross-section AWG
24 ... 16
Performance level (PL)
e (2-channel wiring)
Standards/regulations
EN 50178
Degree of pollution
2
ECLASS 9.0
27371819
Ambient temperature (operation)
-10 °C ... 55 °C (observe derating)
Power consumption at US
typ. 1.08 W (Outputs inactive)
Input voltage range "0" signal
0 V DC ... 5 V DC
Cable length
max. 100 m (per output)
Nominal output voltage
24 V DC (Supply via A1)
Max. capacitive load
max. 470 nF
Test pulses
≤ 200 µs (Test pulse duration)
Voltage
24 V DC (via A1)
Nominal voltage range
18.2 V DC ... 27.8 V DC (US - 1 V)
Mounting type
DIN rail mounting
Assembly instructions
Observe derating
Housing material
Polyamide PA non-reinforced
Status display
1 x LED (green), 2 x LED (orange)
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Rated insulation voltage
250 V AC
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Conformance
CE-compliant
Height
107.74 mm
Max. permissible humidity (storage/transport)
95 % (non-condensing)
Rated control supply current IS
typ. 45 mA (Outputs inactive)
Inrush current
max. 600 mA (Δt < 10 ms)
Number of inputs
4
Input current range "0" signal
< 1 mA
Protective circuit/component
Suppressor diode
Ohmic load
min. 50 Ω (Observe limiting continuous current)
Short-circuit protection
Yes (self-limitation at 1.1 A)
Cycle time
see user manual
Net weight
141 g
Degree of protection
IP20
Housing color
yellow
Connection method
Push-in connection
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Safety Integrity Level Claim Limit (SIL CL)
3 (2-channel wiring)
Vibration (operation)
10 Hz ... 150 Hz, 2g
ECLASS 11.0
27371819
Rated control circuit supply voltage US
24 V DC -20 % / +20 % (external fuse, typically 4 A)
Filter time
250 ms ±2 ms (Test pulse rate > 500 ms)
Input name
Reset inputs
Output description
PNP, IEC 61131-2 Typ 0,1
Limiting continuous current
100 mA (per channel)
Max. inductive load
max. 2.4 mH
Error detection time at 1-channel structure
< 3.5 s (OFF state)
Output voltage range
18.2 V DC ... 27.8 V DC (US - 1 V)
Restart time
min. 5 s (Boot time)
Mounting position
vertical or horizontal
Min. degree of protection of inst. location
IP54
Operating voltage display
1 x green LED
pluggable
Yes
Stripping length
10 mm
Stop category
0
Rated surge voltage/insulation
Basic insulation 4 kV between 24 V power supply and I/Os to the housing
Overvoltage category
II
Safety Integrity Level (SIL)
2
Shock
10g for Δt = 16 ms (continuous shock, 1000 shocks in each space direction)
ECLASS 10.0.1
27371819

Product condition