1104856 Phoenix Contact Electrical Safety Devices

1104856 Product Details

• Height
  112.58 mm
• Depth
  113.6 mm
• Designation
  Air clearances and creepage distances between the power circuits
• Filter time
  250 ms ±2 ms (Test pulse rate > 500 ms)
• Input name
  Reset inputs
• Voltage
  24 V DC (via A1)
• Ambient temperature (storage/transport)
  -20 °C ... 85 °C
• Rated control circuit supply voltage US
  24 V DC -20 % / +20 % (provide external protection, typically 5 A)
• Description
  Output supply, connected internally to A1/A2
• Max. permissible overall conductor resistance
  1.2 kΩ (Input and reset circuit at US)
• Output description
  PNP, IEC 61131-2 Typ 0,1
• Leakage current
  max. 100 µA
• Max. capacitive load
  max. 680 nF
• Switching frequency
  max. 1/4 x tCycle [Hz]
• Output voltage range
  18.2 V DC ... 27.8 V DC (US - 1 V)
• Maximum inrush current
  1.1 A (Δt = 3 s  at Us)
• Mounting position
  vertical or horizontal
• Mounting type
  DIN rail mounting
• Housing color
  yellow
• Operating voltage display
  1 x green LED
Max. permissible humidity (storage/transport)
95 % (non-condensing)
Power consumption at US
typ. 0.72 W (Outputs inactive)
Input voltage range "0" signal
0 V DC ... 5 V DC
Input current range "0" signal
< 1 mA
Cable length
max. 100 m (per output)
Nominal output voltage
24 V DC (Supply via A1)
Max. inductive load
max. 1.4 mH
Discharging circuit
Yes, internal
Cycle time
see user manual
Net weight
159 g
Protection class
III (EN 50178)
Connection method
Screw connection
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Stop category
0
Rated surge voltage/insulation
Basic insulation 4 kV between 24 V power supply and I/Os to the housing
Rated insulation voltage
250 V AC
ECLASS 10.0.1
27371819
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Width
22.61 mm
Max. permissible relative humidity (operation)
95 % (non-condensing)
Rated control supply current IS
See supply A1/A2
Protective circuit
Serial protection against polarity reversal
Number of inputs
4
Input voltage range "1" signal
11 V DC ... 28.8 V DC
Number of outputs
4
Ohmic load
min. 50 Ω (Observe limiting continuous current)
Error detection time at 1-channel structure
< 3.5 s (OFF state)
Nominal operating mode
100% operating factor
Min. degree of protection of inst. location
IP54
Housing material
Polyamide PA non-reinforced
pluggable
Yes
Torque
0.5 Nm ... 0.6 Nm
Safety Integrity Level (SIL)
2
Safety Integrity Level Claim Limit (SIL CL)
3 (2-channel wiring)
Shock
10g for Δt = 16 ms (continuous shock, 1000 shocks in each space direction)
ECLASS 9.0
27371819
Ambient temperature (operation)
-10 °C ... 55 °C (observe derating)
Maximum altitude
≤ 2000 m (Above sea level)
Inrush current
max. 750 mA (Δt  1 s)
Description of the input
IEC 61131-2 type 3
Protective circuit/component
Suppressor diode
Output name
O1A, O1B, O2A, O2B, O3A, O3B, O4A, O4B
Output voltage when switched off
max. 0.1 V
Test pulses
< 80 µs (Test pulse width of low test pulses)
Response time
see user manual
Assembly instructions
Observe derating
Status display
1 x LED (green), 2 x LED (orange)
Stripping length
7 mm
Standards/regulations
EN 50178
Conformance
CE-compliant
Current consumption
typ. 10 mA (typically with US)
Nominal output voltage range
18 V DC ... 27.6 V DC (US - 1.2 V)
Limiting continuous current
100 mA (per channel)
Short-circuit protection
Yes (self-limitation at 1.1 A)
Restart time
min. 5 s (Boot time)
Degree of protection
IP20
Indication
2 x LED (red)
Screw thread
M3
Degree of pollution
2
ECLASS 11.0
27371819
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Conductor cross-section AWG
24 ... 12
Performance level (PL)
e (2-channel wiring)
Overvoltage category
II
Vibration (operation)
10 Hz ... 150 Hz, 2g

Product condition