1082479 Phoenix Contact Terminal Blocks
Part#:1082479
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Distribution block, Block with horizontal alignment, The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories, nom. voltage: 800 V, number of connections: 6, cross section: 0.5 mm² - 16 mm², AW
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1082479 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Color gray
- Degree of pollution 3
- Maximum load current 76 A (with a 16 mm² conductor cross section, rigid)
- Result of power-frequency withstand voltage test Test passed
- Bending test rotation speed 10 rpm
- Conductor cross section tensile test 16 mm²
- Tight fit on carrier NS 35
- Result of aging test Test passed
- Number of levels 1
- Flammability rating according to UL 94 V0
- Insulating material group I
- Open side panel No
- Result of surge voltage test Test passed
- Surge voltage test setpoint 9.8 kV
- Result of flexion and pull-out test Test passed
- Tensile test result Test passed
- Result of temperature-rise test Test passed
- Result of thermal test Test passed
- Test spectrum Service life test category 2, bogie-mounted
- ASD level 6.12 (m/s2)2/Hz
- Shock duration 18 ms
- Static insulating material application in cold -60 °C
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Height NS 35/7,5 34.2 mm
- Height 25.1 mm
- Conductor cross section flexible min. 0.5 mm²
- Note Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
- Insulating material PA
- Maximum total current 90 A (The maximum load current of the individual terminal point must not be exceeded.)
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Bending test turns 135
- Result of tight fit on support Test passed
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Width 37 mm
- Conductor cross section AWG min. 20
- Conductor cross section solid max. 16 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- Number of connections 6
- Nominal cross section 10 mm²
- Overvoltage category III
- Nominal voltage UN 800 V
- Finger protection guaranteed
- Power frequency withstand voltage setpoint 2 kV
- Bending test conductor cross section/weight 0.5 mm² / 0.3 kg
- Result of voltage-drop test Test passed
- Ageing test for screwless modular terminal block temperature cycles 192
- Test duration per axis 5 h
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Length 24.5 mm
- Conductor cross section AWG max. 6
- Conductor cross section flexible, with ferrule without plastic sleeve min. 1 mm²
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 11.0 27141120
- Potentials 1
- Rated surge voltage 8 kV
- Back of the hand protection guaranteed
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Tractive force setpoint 100 N
- Short circuit stability result Test passed
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05
- Acceleration 30g
- Shock form Half-sine
- Number of shocks per direction 3
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Stripping length 12 mm ... 14 mm
- Conductor cross section solid min. 1 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 1 mm²
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 9.0 27141120
- Oscillation, broadband noise test result Test passed
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Shock test result Test passed
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Connection in acc. with standard IEC 60947-7-1
- Conductor cross section flexible max. 10 mm²
- Connection cross sections directly pluggable 1 mm² 16 mm²
- ECLASS 10.0.1 27141120
- Ambient temperature (assembly) -5 °C ... 70 °C
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Conductor cross section flexible, with ferrule without plastic sleeve max. 10 mm²
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
