3208746 Phoenix Contact Terminal Blocks

Product Details

• Oscillation, broadband noise test result
  Test passed
• Conductor cross section short circuit testing
  16 mm²
• Acceleration
  5g
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Width
  10.2 mm
• Connection
  1 level
• Tensile test result
  Test passed
• Height
  49.5 mm
• Connection method
  Push-in connection
• Conductor cross section solid max.
  16 mm²
• Max. AWG conductor cross section, flexible
  8
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  10 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• ECLASS 5.0
  27141100
• ETIM 4.0
  EC000897
• UNSPSC 7.0901
  39121410
• UNSPSC 19.0
  39121410
• Maximum load current
  70 A (with a 16 mm² conductor cross section, rigid)
• Result of temperature-rise test
  Test passed
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
1.857 (m/s2)2/Hz
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Length
88.9 mm
Height NS 35/7,5
50.5 mm
Conductor cross section AWG min.
20
Min. AWG conductor cross section, flexible
20
Connection cross sections directly pluggable
1 mm² 16 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 7.0
27141120
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Overvoltage category
III
Result of surge voltage test
Test passed
Result of aging test
Test passed
Test duration per axis
5 h
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
ECLASS 5.1
27141100
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Open side panel
Yes
Nominal current IN
57 A
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Result of voltage-drop test
Test passed
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Stripping length
18 mm
Conductor cross section AWG max.
6
Conductor cross section flexible, with ferrule without plastic sleeve min.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
Result of flexion and pull-out test
Test passed
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Back of the hand protection
guaranteed
Setpoint
5 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
1.92 kA
Test spectrum
Service life test category 1, class B, body mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
30 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/15
58 mm
Connection in acc. with standard
CSA
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Internal cylindrical gage
A6
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 9.0
27141120
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Bending test turns
135
Potentials
1
Insulating material
PA
Insulating material group
I
Nominal voltage UN
1000 V
Finger protection
guaranteed
Tight fit on carrier
NS 35
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Number of levels
1
Color
gray
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
1.82 W
Power frequency withstand voltage setpoint
2.2 kV
Number of connections
3
Area of application
Railway industry
Nominal cross section
10 mm²
Flammability rating according to UL 94
V0
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Conductor cross section solid min.
1 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
2.5 mm²
Conductor cross section flexible max.
16 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Degree of pollution
3