3212131 Phoenix Contact Terminal Blocks

Product Details

• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Permissible humidity (storage/transport)
  30 % ... 70 %
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 4.1
  27141100
• ECLASS 5.0
  27141100
• ECLASS 7.0
  27141141
• ETIM 4.0
  EC000901
• ETIM 6.0
  EC000901
• UNSPSC 11
  39121410
• UNSPSC 18.0
  39121410
• UNSPSC 20.0
  39121410
• Area of application
  Railway industry
• Insulating material
  PA
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Back of the hand protection
  guaranteed
• Test duration per axis
  5 h
• Shock form
  Half-sine
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Test spectrum
  Service life test category 2, bogie-mounted
• Acceleration
  30g
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Conductor cross section AWG min.
20
Max. AWG conductor cross section, flexible
8
ECLASS 11.0
27141141
ECLASS 5.1
27141100
ECLASS 4.0
27141100
ETIM 3.0
EC000901
ETIM 7.0
EC000901
Number of levels
1
Color
green-yellow
Rated surge voltage
8 kV
Overvoltage category
III
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
67.7 mm
Height NS 35/15
58 mm
Connection in acc. with standard
CUL
Connection method
Push-in connection
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Insulating material group
I
Note
Please observe the current carrying capacity of the DIN rails.
Connection
1 level
Conductor cross section solid min.
1 mm²
Conductor cross section AWG max.
6
Min. AWG conductor cross section, flexible
20
Nominal cross section
10 mm²
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of shocks per direction
3
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
10.2 mm
Height
49.5 mm
Number of connections
2
Flammability rating according to UL 94
V0
Degree of pollution
3
Open side panel
Yes
Finger protection
guaranteed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
ECLASS 6.0
27141100
ECLASS 9.0
27141141
ETIM 2.0
EC000901
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Height NS 35/7,5
50.5 mm
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
UNSPSC 13.2
39121410
Stripping length
18 mm
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
2.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
ECLASS 10.0.1
27141141
Conductor cross section flexible min.
0.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Connection cross sections directly pluggable
1 mm² 16 mm²
Conductor cross section flexible max.
16 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
1.5 mm²
Internal cylindrical gage
A6
Conductor cross section solid max.
16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)