3005196 Phoenix Contact Terminal Blocks

3005196 Product Details

• ECLASS 4.0
  27141100
• ECLASS 6.0
  27141100
• UNSPSC 13.2
  39121410
• UNSPSC 6.01
  30211811
• UNSPSC 21.0
  39121410
• Overvoltage category
  III
• Potentials
  1
• Nominal cross section
  10 mm²
• Degree of pollution
  3
• Nominal current IN
  57 A
• Shock protection test specification
  IEC 60529:2001-02
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  2 kV
• Setpoint
  5 N
• Tight fit on carrier
  NS 32/NS 35
• Short-time current
  1.92 kA
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Static insulating material application in cold
  -60 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Length
  56.5 mm
Stripping length
11 mm
Screw thread
M4
Connection in acc. with standard
CSA
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
2 conductors with same cross section, stranded min.
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
Insulating material
PA
Color
gray
Insulating material group
I
Nominal voltage UN
800 V
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
10.2 mm
Height NS 32
64 mm
Height NS 35/7,5
59 mm
Tightening torque, min
1.5 Nm
Tightening torque max
1.8 Nm
Conductor cross section flexible max.
10 mm²
2 conductors with same cross section, solid min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 20.0
39121410
Number of levels
2
Maximum load current
76 A (In case of a 16 mm² conductor connection, the maximum load current must not be exceeded by the total current of all connected conductors.)
Maximum power dissipation for nominal condition
1.82 W (the value is multiplied when connecting multiple levels)
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Screw connection
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible min.
0.5 mm²
Max. AWG conductor cross section, flexible
8
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, stranded max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ETIM 6.0
EC000897
ETIM 2.0
EC000897
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Number of connections
3
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Open side panel
No
Back of the hand protection
guaranteed
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
16 mm²
Result of thermal test
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
66.5 mm
Connection
1 level
Conductor cross section solid max.
16 mm²
Conductor cross section AWG max.
6
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Min. AWG conductor cross section, flexible
20
2 conductors with same cross section, solid max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 19.0
39121410

Product condition