1082407 Phoenix Contact Terminal Blocks

Product Details

• Finger protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test spectrum
  Service life test category 2, bogie-mounted
• Shock duration
  18 ms
• Overvoltage category
  III
• Acceleration
  30g
• Shock test result
  Test passed
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Conductor cross section solid min.
  1 mm²
• Conductor cross section flexible min.
  0.5 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  1 mm²
• Insulating material group
  I
• Result of surge voltage test
  Test passed
• Bending test turns
  135
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Shock form
  Half-sine
• Surface flammability NFPA 130 (ASTM E 162)
  passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
12 mm ... 14 mm
Conductor cross section AWG max.
6
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Open side panel
No
Power frequency withstand voltage setpoint
2 kV
Bending test rotation speed
10 rpm
Test duration per axis
5 h
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
24.5 mm
Connection in acc. with standard
IEC 60947-7-1
Result of voltage-drop test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
37 mm
Height NS 35/7,5
34.6 mm
Height NS 15
32.1 mm
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 9.0
27141120
Ambient temperature (actuation)
-5 °C ... 70 °C
Static insulating material application in cold
-60 °C
Conductor cross section solid max.
16 mm²
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
ECLASS 10.0.1
27141120
ECLASS 11.0
27141120
Flammability rating according to UL 94
V0
Maximum load current
76 A (with a 16 mm² conductor cross section, rigid)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Conductor cross section tensile test
16 mm²
Tractive force setpoint
100 N
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Height
25.1 mm
Nominal cross section
10 mm²
Degree of pollution
3
Surge voltage test setpoint
9.8 kV
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Permissible humidity (storage/transport)
30 % ... 70 %
Number of connections
6
Rated surge voltage
8 kV
Nominal voltage UN
800 V
Tensile test result
Test passed
Connection cross sections directly pluggable
1 mm² 16 mm²
Potentials
1
Back of the hand protection
guaranteed
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Number of levels
1
Color
green
Maximum total current
90 A (The maximum load current of the individual terminal point must not be exceeded.)
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Result of aging test
Test passed