1082024 Phoenix Contact Electrical Safety Devices

1082024 Product Details

• Ambient temperature (operation)
  -40 °C ... 60 °C (observe derating)
• Max. permissible relative humidity (operation)
  75 % (on average, 85% infrequently, non-condensing)
• Rated control circuit supply voltage US
  24 V DC -20 % / +25 % (provide external protection)
• Filter time
  max. 3 ms (Test pulse width of low test pulses)
• Current consumption
  2.5 mA (Typically with US at S34)
• Protective circuit/component
  33 V suppressor diode
• Switching voltage
  min. 5 V AC/DC
• Switching capacity according to IEC 60947-5-1
  5 A (24 V (DC13))
• Typical response time at US
  < 100 ms (automatic start)
• Recovery time
  500 ms (following demand of the safety function)
• Assembly instructions
  See derating curve
• Housing material
  PBT
• Connection method
  Screw connection
• Conductor cross section flexible
  0.2 mm² ... 2.5 mm²
• Torque
  0.5 Nm ... 0.6 Nm
• Safety Integrity Level (SIL)
  3
• Width
  22.5 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Power consumption at US
  typ. 1.8 W
Number of inputs
2
Concurrence
∞
Output description
PNP
Output fuse
6 A gL/gG
Voltage
approx. 23 V DC (Us - 1 V)
Typical release time at US
< 20 ms (on demand via the sensor circuit)
Nominal operating mode
100% operating factor
Mounting position
vertical or horizontal
Status display
2 x green LEDs
Conductor cross-section AWG
24 ... 12
Screw thread
M3
Performance level (PL)
e (5 A DC13; 8760 switching cycles/year or 5 A AC15; 2190 switching cycles/year)
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Maximum altitude
≤ 2000 m (Above sea level)
Inrush current
min. 10 mA AC/DC
Input voltage range "1" signal
19.2 V DC ... 30 V DC
Max. permissible overall conductor resistance
150 Ω
Contact material
AgSnO2
Contact type
3 enabling current paths
Switching frequency
0.5 Hz (ohmic)
Switching capacity
min. 50 mW
Typical pickup time at US
< 100 ms (when controlled via A1)
Mounting type
DIN rail mounting
Min. degree of protection of inst. location
IP54
Housing color
yellow
pluggable
Yes
Stripping length
7 mm
Category
4
Rated insulation voltage
250 V AC
Rated surge voltage/insulation
Basic insulation 4 kV between all current paths
Vibration (operation)
10 Hz ... 150 Hz, 2g
ECLASS 10.0.1
27371819
Depth
114.5 mm
Protective circuit
Serial protection against polarity reversal
Description of the input
non-safety-related
Input current range "0" signal
0 mA ... 2 mA (S10, S12)
Output name
Enabling current paths
Limiting continuous current
6 A
Mechanical service life
10x 106 cycles
Current
max. 100 mA
Restart time
< 1 s (Boot time)
Net weight
185.26 g
Degree of protection
IP20
Operating voltage display
1 x green LED
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Stop category
0
Safety Integrity Level Claim Limit (SIL CL)
3
Degree of pollution
2
Conformance
CE-compliant
China RoHS
Environmentally Friendly Use Period = 50 years
Height
112.4 mm
Designation
Air clearances and creepage distances between the power circuits
Rated control supply current IS
typ. 75 mA
Input name
Start circuit
Input voltage range "0" signal
0 V ... 5 V (S10, S12)
Number of outputs
1
Sq. Total current
72 A2 (observe derating)
Maximum inrush current
1 A (Δt = 5 ms at Us)
Short-circuit protection
Yes
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
REACh SVHC
Lead 7439-92-1
ECLASS 9.0
27371819
Standards/regulations
EN 60947-5-1
Overvoltage category
II
Shock
15g for Δt = 11 ms (continuous shock: 10g for Δt = 16 ms)
ECLASS 11.0
27371819

Product condition